OpenSees Example 1a. 2D Elastic Cantilever Column: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
==Introduction==
Example 1a is a simple model of an elastic cantilever column. The objective of this example is to give an overview of input format.
Example 1a is a simple model of an elastic cantilever column. The objective of this example is to give an overview of input format.


While the structural model is the same, there are two lateral-load cases:
While the structural model is the same, there are two lateral-load cases:
==Input==


{| style="margin:0; background:none;"  
{| style="margin:0; background:none;"  
Line 32: Line 35:
|}
|}


==Run==
#To run Static Pushover analysis:
:<strong>source Ex1a.Canti2D.Push.tcl</strong>
#To run EQ ground-motion analysis (BM68elc.acc needs to be downloaded into the same directory):
:<strong>source Ex1a.Canti2D.EQ.tcl</strong>





Revision as of 16:31, 11 November 2009

Introduction

Example 1a is a simple model of an elastic cantilever column. The objective of this example is to give an overview of input format.

While the structural model is the same, there are two lateral-load cases:

Input

Static Pushover


Dynamic EQ Ground Motion



Run

  1. To run Static Pushover analysis:
source Ex1a.Canti2D.Push.tcl
  1. To run EQ ground-motion analysis (BM68elc.acc needs to be downloaded into the same directory):
source Ex1a.Canti2D.EQ.tcl





Return to OpenSees Examples Manual

Return to OpenSees User