Examples: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 43: | Line 43: | ||
'''Structural Examples''' | '''Structural Examples''' | ||
*[[Infill Wall Model and Element Removal]] | *[[Infill Wall Model and Element Removal]] | ||
*[[Pushover Analysis of 2-Story Moment Frame|Pushover Analysis of 2-Story Moment Frame (without panel zones)]] | *[[Pushover Analysis of 2-Story Moment Frame|Pushover Analysis of 2-Story Moment Frame (without panel zones)]] | ||
*[[Dynamic Analysis of 2-Story Moment Frame|Dynamic Analysis of 2-Story Moment Frame (without panel zones)]] | *[[Dynamic Analysis of 2-Story Moment Frame|Dynamic Analysis of 2-Story Moment Frame (without panel zones)]] | ||
Revision as of 18:29, 15 March 2011
- The OpenSees Basic Examples Manual contains examples for new users. It contains very simple examples on how to perform analysis of truss, frame and continuum models. It is a resource intended for new users of OpenSees. It only touches on the benefits that programming using the tcl language can provide.
- The OpenSees Examples Manual contains examples on how to create models and perform simulations on those models.
- It has examples ranging from simple single element linear models to complex 3D nonlinear fiber models.
- These examples are intended only to show the usage of the commands available in OpenSees. They are not necessarily examples showing the best of practice.
- New users to OpenSees are encouraged to use the Basic Examples Manual as this manual can be quite intimidating for new users.
- The OpenSees Sensitivity Analysis contains commands and application examples on how to perform response sensitivity analysis.
- These examples are intended only to show the usage of the commands available in OpenSees. They are not necessarily examples showing the best of practice.
- Practical Examples
Geotechnical Examples
- Simulating a Centrifuge Test
- Laterally-Loaded Pile Foundation (Static Analysis)
- One-dimensional Consolidation
- Total Stress Site Response Analysis of a Layered Soil Column
- Effective Stress Site Response Analysis of a Layered Soil Column
- Dynamic Effective Stress Analysis of a Slope
- GiD ProblemTypes for 2D Slope Analysis Input File Generation
- Excavation Supported by Cantilevered Sheet Pile Wall
Structural Examples
- Infill Wall Model and Element Removal
- Pushover Analysis of 2-Story Moment Frame (without panel zones)
- Dynamic Analysis of 2-Story Moment Frame (without panel zones)
- Pushover and Dynamic Analyses of 2-Story Moment Frame with Panel Zones and RBS
- Dynamic Analyses of 1-Story Moment Frame with Viscous Dampers
- Parameter Study using Parallel Processing
Material Calibration Examples
- Interesting Articles