Modeling Commands

The model or domain in OpenSees is an aggregation of elements, nodes, single- and multi-point constraints and load patterns.

<uml> package "OpenSees Model" #DDDDDD

abstract class Element abstract class TimeSeries abstract class ElementLoad Domain o- Element Domain o- Node Domain o- SP_Constraint Domain o- MP_Constraint Domain o- LoadPattern LoadPattern o- "one" TimeSeries LoadPattern o- ElementLoad LoadPattern o- NodalLoad LoadPattern o- SP_Constraint </uml>

The following are the modeling commands that have been added to interpreter to create the finite element model:

1. model
2. element
3. node
4. SP_Constraint (single-point constraint), which prescribe the movement (typically 0) of a single dof at a node. There are a number of commands for creating single-point coonstraints:
   • fix
   • fixX
   • fixY
   • fixZ
5. MP_Constraint (multi-point constraint), which prescribe that the movement of certain dof at one node are defined by the movement of certain dof at another node. There again are a number of commands for defining multi-point constraints.
   • equalDOF
   • rigidDiaphragm
   • rigidLink
6. timeSeries
7. pattern
8. mass
9. block
10. region
11. rayleigh

In addition to these commands, the typical element in OpenSees has the material nonlinearity and sometimes geometry contained in other objects, materials and geometric transformations. Commands have been added to the interpreter to create these objects as well.

<uml> package "Element" abstract class Element abstract class Material abstract class UniaxialMaterial abstract class NDMaterial abstract class SectionForceDeformation abstract class GeometricTransformation

Element o- Material Element o- GeometricTransformation Material <|-- UniaxialMaterial Material <|-- SectionForceDeformation Material <|-- NDMaterial

</uml>

1. uniaxialMaterial
2. ndMaterial
3. section
4. geometricTransf