Sensitivity Command Manual: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
(Blanked the page)
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Sensitivity Analysis| Return to Sensitivity Analysis User Page]]


{{Sensitivity_Command_Manual}}
For OpenSees we have added commands to Tcl for finite element analysis. These commands can be grouped into four sections:
# [[General Commands]] commands added to the interpreter to create the sensitivity analysis.
# [[Material Commands]] commands added to Tcl to create the analysis procedure.
# [[Section Commands]] commands aded to Tcl to monitor what is happening in the model during the analysis.
# [[Element Commands]] commands added to Tcl to help monitor and modify the model and analysis during the run-time.
# [[Constraint Commands]] commands added to Tcl to help monitor and modify the model and analysis during the run-time.
----

Latest revision as of 06:01, 13 March 2011

Return to Sensitivity Analysis User Page





For OpenSees we have added commands to Tcl for finite element analysis. These commands can be grouped into four sections:

  1. General Commands commands added to the interpreter to create the sensitivity analysis.
  2. Material Commands commands added to Tcl to create the analysis procedure.
  3. Section Commands commands aded to Tcl to monitor what is happening in the model during the analysis.
  4. Element Commands commands added to Tcl to help monitor and modify the model and analysis during the run-time.
  5. Constraint Commands commands added to Tcl to help monitor and modify the model and analysis during the run-time.