Parameter Command: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(11 intermediate revisions by the same user not shown)
Line 17: Line 17:


----
----
For example,
EXAMPLE
# To identify the elastic modulus, E, of the material 1 at section 3 of element 4, the <specific object arguments> string becomes
* To identify the elastic modulus, E, of the material 1 at section 3 of element 4, the <specific object arguments> string becomes
parameter 1 element 4 section 3 material 1 E
<source lang="tcl">
# To identify the elastic modulus, E, of elastic section 3 of element 4 (for elastic section, no specific material need to be
  parameter 1 element 4 section 3 material 1 E
defined), the <specific object arguments> string becomes:
</source>
parameter 1 element 4 section 3 E
# To parameterize E for element 4 with material 1 (no section need to be defined), the <specific object arguments> string
simplifies as:
parameter 1 element 4 material 1 E


: Notice that the format of the <specific object arguments> is different for each considered element/section/material. The user is : referred to the corresponding section of this manual for the specific set of parameters and the relative <specific object  
* To identify the elastic modulus, E, of elastic section 3 of element 4 (for elastic section, no specific material need to be
: arguments> format.
: defined), the <specific object arguments> string becomes:
<source lang="tcl">
  parameter 1 element 4 section 3 E
</source>
 
* To parameterize E for element 4 with material 1 (no section need to be defined), the <specific object arguments> string
: simplifies as:
<source lang="tcl">
  parameter 1 element 4 material 1 E
</source>
 
----
: Notice that the format of the <specific object arguments> is different for each considered element/section/material. The user is referred to the corresponding section of this manual for the specific set of parameters and the relative <specific object arguments> format.

Latest revision as of 18:25, 14 January 2011





In DDM-based FE response sensitivity analysis, the sensitivity parameters can be material,
geometry or discrete loading parameters. Each parameter should be defined as:
parameter $tag <specific object arguments>

$tag integer tag identifying the parameter.
<specific object arguments> depend on the object in the FE model encapsulating the desired parameters.

Note: Each parameter must be unique in the FE domain, and all parameter tags must be numbered sequentially starting from 1.


EXAMPLE
  • To identify the elastic modulus, E, of the material 1 at section 3 of element 4, the <specific object arguments> string becomes
   parameter 1 element 4 section 3 material 1 E
  • To identify the elastic modulus, E, of elastic section 3 of element 4 (for elastic section, no specific material need to be
defined), the <specific object arguments> string becomes:
   parameter 1 element 4 section 3 E
  • To parameterize E for element 4 with material 1 (no section need to be defined), the <specific object arguments> string
simplifies as:
   parameter 1 element 4 material 1 E

Notice that the format of the <specific object arguments> is different for each considered element/section/material. The user is referred to the corresponding section of this manual for the specific set of parameters and the relative <specific object arguments> format.