Reliability Command: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
(Created page with ':;<h2>reliability Command</h2> : This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This : reliability domai...')
 
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
:;<h2>reliability Command</h2>
{{Sensitivity_Command_Manual}}
: This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This  
: This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This  
: reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity : analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’  
: reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity : analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’  

Latest revision as of 21:13, 11 January 2011





This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This
reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity : analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’
reliability