OpenSees Example 1b. Elastic Portal Frame: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
__NOTOC__
==Introduction==
==Introduction==
Example 1b is a simple model of an elastic portal frame. The objective of this example is to give an overview of input format.
Example 1b is a simple model of an elastic portal frame. The objective of this example is to give an overview of input format.
Line 33: Line 32:
<strong>Files</strong>
<strong>Files</strong>
*[[Media:Ex1b.Portal2D.EQ.tcl|Ex1b.Portal2D.EQ.tcl]]
*[[Media:Ex1b.Portal2D.EQ.tcl|Ex1b.Portal2D.EQ.tcl]]
*[[Media:BM68elc.acc|BM68elc.acc]] (ground-motion file)
*[[Media:BM68elc.zip|BM68elc.acc]] (ground-motion file)
</div>
</div>
|}
|}
Line 57: Line 56:


----
----
Return to [[OpenSees Examples Manual]]
Return to [[OpenSees Examples Manual -- Structural Models & Analyses]]


Return to [[OpenSees User]]
Return to [[OpenSees User]]

Latest revision as of 23:26, 1 September 2010

Introduction

Example 1b is a simple model of an elastic portal frame. The objective of this example is to give an overview of input format.

While the structural model is the same, there are three lateral-load cases:


Input

Static Pushover


Dynamic EQ Ground Motion



Files


Run

  • To run Static Pushover analysis:
source Ex1b.Portal2D.Push.tcl
  • To run EQ ground-motion analysis (BM68elc.acc needs to be downloaded into the same directory):
source Ex1b.Portal2D.EQ.tcl

Notes


Return to OpenSees Examples Manual -- Structural Models & Analyses

Return to OpenSees User