Getting Started: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{GettingStartedManualMenu}}
by Silvia Mazzoni, Frank McKenna, Gregory L. Fenves
by Silvia Mazzoni, Frank McKenna, Gregory L. Fenves


Pacific Earthquake Engineering Research Center
Pacific Earthquake Engineering Research Center
University of California, Berkeley
University of California, Berkeley
OpenSees version 1.6.0
   
   
The original documentation and validation examples of the Getting Started with OpenSees Manual were supported by NEESgrid subcontract award 04-344 from the NEESgrid System Integrator (SI) under NSF grant CMS-0117853
The original documentation and validation examples of the Getting Started with OpenSees Manual were supported by NEESgrid subcontract award 04-344 from the NEESgrid System Integrator (SI) under NSF grant CMS-0117853




*[[Getting Started with OpenSees -- Introduction]]
*[[Getting Started with OpenSees -- Introduction | Introduction]]
*[[Getting Started with OpenSees -- Download OpenSees]]
*[[Getting Started with OpenSees -- Download OpenSees| Download OpenSees]]
*[[Getting Started with OpenSees -- Run OpenSees]]
*[[Getting Started with OpenSees -- Run OpenSees | Run OpenSees]]
*[[Getting Started with OpenSees -- Problem Definition]]
*[[Getting Started with OpenSees -- Problem Definition | Problem Definition]]
*[[Getting Started with OpenSees -- Model Builder]]
*[[Getting Started with OpenSees -- Model Builder | Model Builder]]
*[[Getting Started with OpenSees -- Nodes]]
*[[Getting Started with OpenSees -- Nodes | Nodes]]
*[[Getting Started with OpenSees -- Elements]]
*[[Getting Started with OpenSees -- Elements | Elements]]
*[[Getting Started with OpenSees -- Recorders]]
*[[Getting Started with OpenSees -- Recorders | Recorders]]
*[[Getting Started with OpenSees -- Summary of Model-Building Input File]]
*[[Getting Started with OpenSees -- Summary of Model-Building Input File | Summary of Model-Building Input File]]
*[[Getting Started with OpenSees -- Loads and Analysis]]
*[[Getting Started with OpenSees -- Loads and Analysis | Loads and Analysis]]
*[[Getting Started with OpenSees -- Gravity Loads]]
*[[Getting Started with OpenSees -- Gravity Loads | Gravity Loads]]
*[[Getting Started with OpenSees -- Summary of Gravity Loads]]
*[[Getting Started with OpenSees -- Summary of Gravity Loads | Summary of Gravity Loads]]
*[[Getting Started with OpenSees -- Lateral Loads -- Static Pushover]]
*[[Getting Started with OpenSees -- Lateral Loads -- Static Pushover | Lateral Loads -- Static Pushover]]
*[[Getting Started with OpenSees -- Lateral Loads -- Cyclic Lateral Load]]
*[[Getting Started with OpenSees -- Lateral Loads -- Cyclic Lateral Load | Lateral Loads -- Cyclic Lateral Load]]
*[[Getting Started with OpenSees -- Lateral Loads -- Dynamic ground motion]]
*[[Getting Started with OpenSees -- Lateral Loads -- Dynamic ground motion | Lateral Loads -- Dynamic ground motion]]

Latest revision as of 21:10, 17 March 2010