GettingStartedInputFile.tcl -– Lateral Loads

From OpenSeesWiki
Revision as of 17:50, 30 October 2009 by Silviamazzoni (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
# LATERAL LOADS ---------------------------------------  
addLoadData LoadLabel StaticPushover; 		# STATIC PUSHOVER   
addLoadData LoadTypeLabel LateralPushover;		# options: LateralPushover, UniformEQ,  UniformSine
addLoadData DMax 1*\$in;								# maximum displacement
addLoadData ControlNodeFloor top;					  
addLoad  
addLoadData LoadLabel EQ;							# EQ TIME-HISTORY  
addLoadData LoadTypeLabel UniformEQ;		# options: LateralPushover, UniformEQ,  UniformSine
addLoadData GMfactor \$g;								# ground-motion input-units factor   
addLoadData GMdirectory "GMfiles";			# directory where ground motions are  
addLoadData FileType "PEER";						# ground-motion file type  
addLoadData GMfilename "H-E12140.at2";		# ground-motion filename for input  
addLoadData GMdirection X;							# lateral dof for ground motion input  
addLoadData GMscale 1.;								# scaling of ground motion for input  
addLoad  
addLoadData LoadLabel EQ2D;							# EQ TIME-HISTORY  
addLoadData LoadTypeLabel UniformEQ2D;		# options: LateralPushover, UniformEQ,  UniformSine
addLoadData GMfactor \$g;								# ground-motion input-units factor   
addLoadData GMdirectory "GMfiles";				# directory where ground motions are  
addLoadData FileType "PEER";							# ground-motion file type  
addLoadData GMfilenameX "H-E01140.AT2";		# ground-motion filename for input  
addLoadData GMscaleX 1.;									# scaling of ground motion for input  
addLoadData GMfilenameZ "H-E12140.AT2";		# ground-motion filename for input  
addLoadData GMscaleZ 1.;									# scaling of ground motion for input  
addLoad 
addLoadData LoadLabel EQ3D;							# EQ TIME-HISTORY  
addLoadData LoadTypeLabel UniformEQ3D;		# options: LateralPushover, UniformEQ,  UniformSine
addLoadData GMfactor \$g;								# ground-motion input-units factor   
addLoadData GMdirectory "GMfiles";				# directory where ground motions are  
addLoadData FileType "PEER";							# ground-motion file type  
addLoadData GMfilenameX "H-E01140.AT2";		# ground-motion filename for input  
addLoadData GMscaleX 1.;									# scaling of ground motion for input  
addLoadData GMfilenameY "H-E01140.AT2";		# ground-motion filename for input  
addLoadData GMscaleY 0.3;								# scaling of ground motion for input  
addLoadData GMfilenameZ "H-E12140.AT2";		# ground-motion filename for input  
addLoadData GMscaleZ 1.;									# scaling of ground motion for input  
addLoad  
puts --DoneLoad--

Return to Getting Started with BuildingTcl