BuildingTcl -- addLoadCombination

From OpenSeesWiki
Revision as of 05:11, 30 October 2009 by Silviamazzoni (talk | contribs)
Jump to navigation Jump to search

Commands

addLoadCombinationData LoadCombinationLabel $LoadCombinationLabel
addLoadCombinationData LoadCombinationDescription "$LoadCombinationDescription"
addLoadCombinationData LoadCombinationModelLabel $LoadCombinationModelLabel
addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel1 <LoadFactor $LoadFactorGravity1> <InertialMassFactor $InertialMassFactorGravity1>
<addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel2 <LoadFactor $LoadFactorGravity2> <InertialMassFactor $InertialMassFactorGravity2> >

...

<addLoadCombinationData -GravityLoad AnalysisModelLabel $GravityAnalysisModelLabel1 <Nstep $NstepGravity> <Tolerance $ToleranceGravity>>
<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel1 <AnalysisModelLabel $LateralAnalysisModelLabel1> <$LateralLoadArgumentLabel1a $LateralLoadArgumentValue1a> <$LateralLoadArgumentLabel1b $LateralLoadArgumentValue1b> ... >
<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel2 <AnalysisModelLabel $LateralAnalysisModelLabel2> <$LateralLoadArgumentLabel2a $LateralLoadArgumentValue2a> <$LateralLoadArgumentLabel2b $LateralLoadArgumentValue2b> ... >

...

<addLoadCombinationData InertialMassFactor $InertialMassFactor >
addLoadCombination

Arguments

$LoadCombinationLabel
Unique LoadCombination Label for reference
$LoadCombinationDescription
Bracketed text. Optional, default: blank {}
$LoadCombinationModelLabel
Specifies which LoadCombinationModel is being used. Currently, Optional, default: DefaultLoadCombinationModel
$GravityLoadLabel1 ...
Previously-defined Gravity Load Label, specified within the model.
At leaset one GravityLoadLabel must be specified in each LoadCombination.
$LoadFactorGravity1 ...
Scaling factor for GravityLoadLabel1. Optional, default=1.0
$InertialMassFactorGravity1 ...
Inertial-Mass factor for GravityLoadLabel1. Optional, default=1.0
$GravityAnalysisModelLabel
Previously-defined AnalysisModelLabel, used in performing load-controlled gravity analysis : Optional, default= DefaultLoadControl
NstepGravity
Number of step to be taken in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel
ToleranceGravity
Convergence-test tolerance used in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel


Notes

The addLoadCombination command must be placed at the end of each LoadCombination-data definition, as it takes all data defined since the last addLoadCombination command and define the LoadCombination.


Options




Return to BuildingTcl Command Language Manual