BuildingTcl -- addLoadCombination

From OpenSeesWiki
Revision as of 04:34, 30 October 2009 by Silviamazzoni (talk | contribs)
Jump to navigation Jump to search

Commands

addLoadCombinationData LoadCombinationLabel $LoadCombinationLabel
addLoadCombinationData LoadCombinationDescription "$LoadCombinationDescription"
addLoadCombinationData LoadCombinationModelLabel $LoadCombinationModelLabel
addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel1 <AnalysisModelLabel $GravityAnalysisModelLabel1> <$GravityLoadArgumentLabel1a $GravityLoadArgumentValue1a> <$GravityLoadArgumentLabel1b $GravityLoadArgumentValue1b> ...
addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel2 <AnalysisModelLabel $GravityAnalysisModelLabel2> <$GravityLoadArgumentLabel2a $GravityLoadArgumentValue2a> <$GravityLoadArgumentLabel2b $GravityLoadArgumentValue2b> ...

...

<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel1 <AnalysisModelLabel $LateralAnalysisModelLabel1> <$LateralLoadArgumentLabel1a $LateralLoadArgumentValue1a> <$LateralLoadArgumentLabel1b $LateralLoadArgumentValue1b> ... >
<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel2 <AnalysisModelLabel $LateralAnalysisModelLabel2> <$LateralLoadArgumentLabel2a $LateralLoadArgumentValue2a> <$LateralLoadArgumentLabel2b $LateralLoadArgumentValue2b> ... >

...

<addLoadCombinationData InertialMassFactor $InertialMassFactor >
addLoadCombination

Arguments

$LoadCombinationLabel
Unique LoadCombination Label for reference
$LoadCombinationDescription
Bracketed text. Optional, default: blank {}
$LoadCombinationModelLabel
Specifies which LoadCombinationModel is being used. Currently, Optional, default: DefaultLoadCombinationModel
$GravityLoadLabel1 ...
Previously-defined Gravity Load Label, specified within the model. : At leaset one GravityLoadLabel must be specified in each LoadCombination.
<AnalysisModelLabel $GravityAnalysisModelLabel1> ; # Previously-defined AnalysisModelLabel, used in performing load-controlled gravity analysis
Optional, default: DefaultLoadControl
<$GravityLoadArgumentLabel1a $GravityLoadArgumentValue1a> <$GravityLoadArgumentLabel1b $GravityLoadArgumentValue1b> ...
Optional modifications to $GravityAnalysisModelLabel1 and $GravityLoadLabel1
GravityAnalysisModelLabel1 ::: Nstep Tolerance
GravityLoadLabel1 ::: LoadFactor InertialMassFactor
$GravityLoadLabel1
Specifies which LoadCombinationModel is being used. Currently, Optional, default: DefaultLoadCombinationModel


Notes

The addLoadCombination command must be placed at the end of each LoadCombination-data definition, as it takes all data defined since the last addLoadCombination command and define the LoadCombination.


Options




Return to BuildingTcl Command Language Manual