Rayleigh Damping Command

From OpenSeesWiki
Revision as of 19:18, 25 September 2009 by Fmk (talk | contribs) (New page: This command is used to assign damping to all previously-defined elements and nodes. When using rayleigh damping in OpenSees, the damping matrix for an element or node, D is specified as a...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This command is used to assign damping to all previously-defined elements and nodes. When using rayleigh damping in OpenSees, the damping matrix for an element or node, D is specified as a combination of stiffness and mass-proportional damping matrices:

D = $alphaM * M + $betaK * Kcurrent +$betaKinit * Kinit + $betaKcomm * KlastCommit


rayleigh $alphaM $betaK $betaKinit $betaKcomm

$nodeTag integer tag identifying node
$alphaM factor applied to elements or nodes mass matrix
$betaK factor applied to elements current stiffness matrix.
$betaKinit factor applied to elements initial stiffness matrix.
$betaKcomm factor applied to elements committed stiffness matrix.


NOTE:

The command overwrites any existing damping coeeficients at the Elements and Nodes.


EXAMPLE:

rayleigh 0.01 0.02 0.0 0.0


Code Developed by: fmk


NOTE:

The command overwrites any existing damping coeeficients at the Elements and Nodes.