EleResponse Command
This command is used to obtain the same element quantities as those obtained from the element recorder at a particular time step.
| eleResponse $eleTag $arg1 $arg2 |
| $eleTag | integer tag identifying element |
| $arg1, $arg2 | same arguments as those specified in element recorder. These arguments are specific to the type of element being used. |
EXAMPLE:
For a simple truss example if these are the recorder commands used:
recorder Element -time -ele 1 2 3 -file a.out axialForce
recorder Element -time -ele 1 2 3 -file b.out material stressthen these are the corresponding eleResponse commands
set a [eleResponse 1 forces]
set b [eleResponse 1 material stress]Code Developed by: fmk