BuildingTcl -- ModelTypeLabel 3DFrame
![](/wiki/images/a/a5/BuildingTclLogo.gif)
Commands
- addModelData ModelLabel $ModelLabel
- addModelData ModelTypeLabel 3DFrame
- addModelData PlanModelLabel $PlanModelLabel
- <addModelData ModelDescription "$ModelDescription">
- (addModelData -addElevation ElevationModelLabel $ElevationModelLabel1 GridLineLabel $GridLineLabel1 <CrossGridLineLabel "$crossGridLineLabel1 $crossGridLineLabel2 ...">)
- (addModelData -addElevation ElevationModelLabel $ElevationModelLabel2 GridLineLabel "$GridLineLabel2 $GridLineLabel3 ..." <CrossGridLineLabel "$crossGridLineLabel1 $crossGridLineLabel2 ...">)
- (addModelData -addElevation ElevationModelLabel $ElevationModelLabel2 GridLineLabelRange "$startGridLineLabel1 $emdGridLineLabel1" <CrossGridLineLabel "$crossGridLineLabel1 $crossGridLineLabel2 ...">)
- …
- addModel
Required Arguments
- $ModelLabel
- Unique Model Label for reference
- $PlanModelLabel
- Previously-Defined PlanModelLabel. Plan dimensions control bay widths in 3DFrame model
Optional Input Arguments
- $ModelDescription
- Text. Optional, default = blank {}
The following data may need an indeterminate number of input lines, indicated by the parentheses ()
Geometry Data
- $ElevationModelLabel
- Previously-Defined ElevationModelLabel
- $GridLineLabel
- # GridLineLabel defined in $PlanModelLabel where $ElevationModelLabel will be placed.
- By default, the fist elevation ColumnLine corresponds to the first grid-line intersection in $PlanModelLabel and so on.
- CrossGridLineLabel "$crossGridLineLabel1 $crossGridLineLabel2 ...
- The user can specify the intersecting GridLineLabels on $PlanModelLabel.
- The $crossGridLineLabel do not have to be continuous, but they have to be consecutive -- the user can skip GridLine intersections
Notes
There are three ways to specify the above data
- Individual Value
- The value is specified individually
- List of quantities
- The quantities are specified individually in a Tcl list "$Quantity1 $Quantity2 ..."
- Range of quantities with the same value
- Quantities are specified by a start value and an end value placed in a Tcl list "$StartQuantity $EndQuantity"
Options
Return to BuildingTcl Command Language Manual