File:Any direction earthquake.pdf

From OpenSeesWiki
Revision as of 07:37, 10 January 2018 by M.Foroughi (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Any_direction_earthquake.pdf(file size: 670 KB, MIME type: application/pdf)

In this example we want to apply earthquake in any direction to a 3D elastic frame by using UniformExcitation command in OpenSEES software. Presented method is usable for any other 3D structure. In OpenSEES by UniformExcitation command we can apply acceleration in global directions. But it is not possible to apply acceleration in a direction other than global directions. To gain this end we have to rotate model through an introduced angle. So model geometry is dependent on that angle.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current22:04, 9 January 2018 (670 KB)M.Foroughi (talk | contribs)In this example we want to apply earthquake in any direction to a 3D elastic frame by using UniformExcitation command in OpenSEES software. Presented method is usable for any other 3D structure. In OpenSEES by UniformExcitation command we can apply accele

The following page uses this file: