Compilation Guideline of OpenSeeMP on Linux Machines

From OpenSeesWiki
Revision as of 21:59, 15 October 2012 by Kmashfiq (talk | contribs)
Jump to navigation Jump to search

Compilation Guideline of OpenSeeMP on Linux Machines

This guide is developed in a systematic manner assuming ActiveTcl, MPICH2 and other packages are not pre-installed in the system. But even if those are available slight modification will enable us to compile OpenSeesMP.

The following tarballs are used to compile OpenSeesMP in this manual. This instruction only works with OpenSees 2.3.2.2 version(svn code – 4985). Package’s version has importance for compatibility issues.


Required Packages

ActiveTcl8.5.11.1.295590-linux-x86_64-threaded.tar.gz
db-5.3.21.NC.tar.gz
lapack-3.4.1.tgz
metis-4.0.3.tar.gz
mpiblacs-patch03.tgz
mpiblacs.tgz –files inside needs to be overwritten by files of mpiblacs-patch03.tgz
mpich2-1.1.tar.gz
MUMPS_4.10.0.tar.gz
openssl-1.0.1c.tar.gz
ParMetis-3.2.0.tar.gz
scalapack-2.0.2.tgz
xblas-1.0.248.tar.gz

You can find the following packages in internet, all of them are free, some of them require an email to the developer.


Some Terminal Commands

Some knowledge of bash commands are necessary, parallel machines often do not have graphical user interface.

mkdir mydir - makes a directory named mydir
chmod 777 a.txt - change write permission of files to full permission
nano a.txt - opens a.txt for editing
cd mydir - gets inside mydir
cd .. - gets out mydir to parent directory
which mpd - checks which mpd is used and returns the location

Some system environment packages

Before compiling any of these packages we need to perform the following tasks - (apt-get command is for ubuntu machines for redhat machines we can use yum install) sudo in and type the following:

mkdir lib
mkdir bin
sudo apt-get update 
sudo apt-get install build-essential
sudo apt-get install subversion
svn co svn://opensees.berkeley.edu/usr/local/svn/OpenSees/trunk@4985 OpenSees

Use-

chmod 777 OpenSees 

To change the editing permission of the directory.

sudo apt-get install make
sudo apt-get install gcc
sudo apt-get install g++
sudo apt-get install gfortran
sudo apt-get install mysql

Compilation of Necessary Packages

After completion of the above mentioned process we need to customize compile and install some packages, which should be done in a ordered manner-

To be systematic and implementation on cluster HPC we will create a directory in home called “PARALLEL”. And put all the tarballs required extracts – in simple named folder like scalapack for sclalapack-2.0.2. Hence we get all packs in one master folder.

The directory structure should be setup as following-

HOME=/home/yourusername
PARALLEL=$(HOME)/PARALLEL
level0 |   level1        |level2

HOME   |   PARALLEL      |blacs
              		 |mpich2
              		 |lapack
             		 |scalapack
             		 |blas
             		 |xblas
             		 |metis
             		 |parmetis
             		 |mumps
              		 |---
Fig – Example directory structure