NodeAccel Command

From OpenSeesWiki
Revision as of 19:53, 25 September 2009 by Fmk (talk | contribs)
Jump to navigation Jump to search

Returns the current acceleration at a specified node.

nodeAccel $nodeTag <$dof>



$nodeTag integer tag identifying node
$dof specific dof at the node (1 through ndf), (optional)


NOTE:

If optional $dof is not provided, an array contaning all accceleration components for every dof at the node is returned.


EXAMPLE:

set a0 [nodeAccel $nodeTag 0]



Code Developed by: fmk