BuildingTcl -- addLoadCombination
Commands
- addLoadCombinationData LoadCombinationLabel $LoadCombinationLabel
- addLoadCombinationData LoadCombinationDescription "$LoadCombinationDescription"
- addLoadCombinationData LoadCombinationModelLabel $LoadCombinationModelLabel
- addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel1 <LoadFactor $LoadFactorGravity1> <InertialMassFactor $InertialMassFactorGravity1>
- <addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel2 <LoadFactor $LoadFactorGravity2> <InertialMassFactor $InertialMassFactorGravity2> >
...
- <addLoadCombinationData -GravityLoad AnalysisModelLabel $GravityAnalysisModelLabel1 <Nstep $NstepGravity> <Tolerance $ToleranceGravity>>
- <addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel1 <AnalysisModelLabel $LateralAnalysisModelLabel1> <LoadFactor $LoadFactorLateral1> <$LateralLoadArgumentLabel1a $LateralLoadArgumentValue1a> <$LateralLoadArgumentLabel1b $LateralLoadArgumentValue1b> ... >
- <addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel2 <AnalysisModelLabel $LateralAnalysisModelLabel2> <LoadFactor $LoadFactorLateral2> <$LateralLoadArgumentLabel2a $LateralLoadArgumentValue2a> <$LateralLoadArgumentLabel2b $LateralLoadArgumentValue2b> ... >
...
- <addLoadCombinationData InertialMassFactor $InertialMassFactor >
- addLoadCombination
Arguments
- $LoadCombinationLabel
- Unique LoadCombination Label for reference
- $LoadCombinationDescription
- Bracketed text. Optional, default: blank {}
- $LoadCombinationModelLabel
- Specifies which LoadCombinationModel is being used. Currently, Optional, default: DefaultLoadCombinationModel
- $GravityLoadLabel1 ...
- Previously-defined Gravity Load Label, specified within the model.
- At leaset one GravityLoadLabel must be specified in each LoadCombination.
- $LoadFactorGravity1 ...
- Scaling factor for GravityLoadLabel1. Optional, default=1.0
- $InertialMassFactorGravity1 ...
- Inertial-Mass factor for GravityLoadLabel1. Optional, default=1.0
- $GravityAnalysisModelLabel
- Previously-defined AnalysisModelLabel, used in performing load-controlled gravity analysis : Optional, default= DefaultLoadControl
- $NstepGravity
- Number of step to be taken in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel
- $ToleranceGravity
- Convergence-test tolerance used in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel
- $LateralLoadLabel1 ...
- Previously-defined Lateral Load Label, specified within the model.
- $LateralAnalysisModelLabel1
- Previously-defined AnalysisModelLabel; Only AnalysisModelLabels of the type consistent with the LoadType of $LateralLoadLabel1 can be used.
- $LoadFactorLateral1...
- Scaling factor for LateralLoadLabel1. Optional, default=1.0
- <$LateralLoadArgumentLabel2a $LateralLoadArgumentValue2a> <$LateralLoadArgumentLabel2b $LateralLoadArgumentValue2b> ... >
- Modifiable arguments corresponding to the LoadType of LateralLoadLabel1
- Options:
- LoadType=LateralPushover
- DMax LateralDirection CycleType NCycles
- LoadType=UniformEQ
- GMdirection GMscale GMfilename
- LoadType=UniformEQ2D
- GMscaleX GMscaleZ GMfilenameX GMfilenameZ
- LoadType=UniformEQ3D
- GMscaleX GMscaleY GMscaleZ GMfilenameX GMfilenameY GMfilenameZ AnalysisModelLabel
- LoadType=LateralPushover
Notes
The addLoadCombination command must be placed at the end of each LoadCombination-data definition, as it takes all data defined since the last addLoadCombination command and define the LoadCombination.
Options
Return to BuildingTcl Command Language Manual