Getting Started with BuildingTcl: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 91: | Line 91: | ||
This file contains all the input data for the building model and simulation. It can be used by both BuildingTcl and the BuildingTclViewer. | This file contains all the input data for the building model and simulation. It can be used by both BuildingTcl and the BuildingTclViewer. | ||
:[[GettingStartedInputFile.tcl -– Setup & Materials]] | #:[[GettingStartedInputFile.tcl -– Setup & Materials]] | ||
:[[GettingStartedInputFile.tcl -– Element Section]] | #:[[GettingStartedInputFile.tcl -– Element Section]] | ||
:[[GettingStartedInputFile.tcl -– Gravity Loads]] | #:[[GettingStartedInputFile.tcl -– Gravity Loads]] | ||
:[[GettingStartedInputFile.tcl -– Model: Elevations]] | #:[[GettingStartedInputFile.tcl -– Model: Elevations]] | ||
:[[GettingStartedInputFile.tcl -– Model: Plans]] | #:[[GettingStartedInputFile.tcl -– Model: Plans]] | ||
:[[GettingStartedInputFile.tcl -– Model: 3DFrames]] | #:[[GettingStartedInputFile.tcl -– Model: 3DFrames]] | ||
:[[GettingStartedInputFile.tcl -– Lateral Loads]] | #:[[GettingStartedInputFile.tcl -– Lateral Loads]] | ||
:[[GettingStartedInputFile.tcl -– Load Combinations]] | #:[[GettingStartedInputFile.tcl -– Load Combinations]] | ||
:[[GettingStartedInputFile.tcl -– Additional Models]] | #:[[GettingStartedInputFile.tcl -– Additional Models]] | ||
:[[GettingStartedInputFile.tcl -– BuildAndAnalyze]] | #:[[GettingStartedInputFile.tcl -– BuildAndAnalyze]] | ||
:[[GettingStartedInputFile.tcl -– Run]] | #:[[GettingStartedInputFile.tcl -– Run]] | ||
== BuildingTclViewer Overview == | == BuildingTclViewer Overview == | ||
Revision as of 03:25, 5 November 2009
BuildingTcl Commands
Most BuildingTcl Library commands consists of a series of parameter-defining add-Data commands, concluded by an add-Object command, which takes the previously defined parameters and assembles them into an individual library object.
- SET UP
source myBuildingTcl.tcl <setDataDir $DataDir> <setUnits -Length $BasicLengthUnit -Force $BasicForceUnit -Time $BasicTimeUnit>
- DEFINE INPUT DATA
# define Materials Library addMaterialData … addMaterial # define Section Library addSectionData … addSection # define ElementModel Library addElementModelData … addElementModel'' # define AnalysisModel Library addAnalysisModelData … addAnalysisModel # define Model (Elevation, Plan, 3DModel) Library addModelData … addModel # define Loads Library addLoadData … addLoad # define LoadCombination Library addLoadCombinationData … addLoadCombination
The following commands are BuildingTcl-specific. They are used to run the OpenSees simulation.
- BUILD AND ANALYZE
SelectModel … SelectLoadCombination ….. BuildAndAnalyze
Run BuildingTcl
- myBuildingTcl.tcl – no graphics
- Incorporates BuildingTcl commands into the Tcl Interpreter
- The BuildingTcl commands are used within OpenSees.exe or OpenSeesTk.exe.
- 1. Run from OpenSees Prompt
- a. Run OpenSees.exe or OpenSeesTk.exe
- b. Source myBuildingTcl.tcl at OpenSees prompt
- c. Source input and analysis files at OpenSees prompt
Run BuildingTclViewer
- myBuildingTclviewer.tcl – BuildingTcl with graphical interface
- Incorporates BuildingTcl & BuildingTclviewer commands into the Tcl/Tk Interpreter
- This file needs to be sourced from the OpenSeesTk.exe prompt, or by double-clicking on the BuildingTclViewer.bat file
- 1. Run from OpenSees Prompt
- a. Run OpenSeesTk.exe – a Tk window opens up (do not close it).
- b. Source myBuildingTclviewer.tcl at the OpenSees prompt
- the Tk window becomes the BuildingTclviewer
Or
- 2. Double-click on myBuildingTclviewer.bat
Getting-Started Input File
This file contains all the input data for the building model and simulation. It can be used by both BuildingTcl and the BuildingTclViewer.