Basic Truss Example: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 3: Line 3:


[[Image:Truss.png|link=Truss Example]]
[[Image:Truss.png|link=Truss Example]]
NOTE:
# The lines in the dashed boxes are lines that appear in the input file.
#all lines that begin with '''#''' are comments, they are ignored by the program (interpreter) but are useful for documenting the code. When creating your own input scripts you are '''highly encouraged''' to use comments.




Line 11: Line 15:


<pre>
<pre>
# units: kip, in
# units: kip, in


Line 46: Line 49:
element Truss 2 2 4 5.0 1
element Truss 2 2 4 5.0 1
element Truss 3 3 4 1
element Truss 3 3 4 1
   
       
   
# Define loads
# Define loads
# ------------
# ------------
Line 63: Line 65:
}
}
</pre>
</pre>


=== Analysis ===
=== Analysis ===
Line 97: Line 98:
</pre>
</pre>


=== Output Specification ===


=== Output Specification ===
For this analysis, we will record the displacement at node 4, and all the element forces expressed both in the global coordinate system and the local system.
For this analysis, we will record the displacement at node 4, and all the element forces expressed both in the global coordinate system
and the local system.


<pre>
<pre>
Line 112: Line 112:


=== Perform The Analysis ===
=== Perform The Analysis ===
After the objects for the model, analysis and outut has been defined we now perform the analysis.  
After the objects for the model, analysis and outut has been defined we now perform the analysis.  
----
 
<pre>
<pre>
analyze 1
analyze 1
Line 120: Line 121:


=== Print Information to Scree ===
=== Print Information to Scree ===
In addition to using recorders, it is possible to specify output using the print and puts commands.
In addition to using recorders, it is possible to specify output using the print and puts commands.


Line 129: Line 131:


=== Results ===
=== Results ===
When you run this script, you should see the following printed to the screen:
When you run this script, you should see the following printed to the screen:
----
----



Revision as of 00:29, 15 March 2011

This example is of a linear-elastic three bar truss, as shown in the figure, subject to static loads.

NOTE:

  1. The lines in the dashed boxes are lines that appear in the input file.
  2. all lines that begin with # are comments, they are ignored by the program (interpreter) but are useful for documenting the code. When creating your own input scripts you are highly encouraged to use comments.


Model

The model consists of four nodes, three truss elements, a single load pattern with a load acting at node 4, and constraints fixing the movement at the other three nodes in the model. As each Truss element has the same Young's Modulus, a single elastic material is created.

# units: kip, in

# Remove existing model
wipe

# Create ModelBuilder (with two-dimensions and 2 DOF/node)
model BasicBuilder -ndm 2 -ndf 2

# Create nodes
# ------------
# Create nodes & add to Domain - command: node nodeId xCrd yCrd
node 1   0.0  0.0
node 2 144.0  0.0
node 3 168.0  0.0
node 4  72.0 96.0
    
# Set the boundary conditions - command: fix nodeID xResrnt? yRestrnt?
fix 1 1 1 
fix 2 1 1
fix 3 1 1
    
# Define materials for truss elements
# -----------------------------------
# Create Elastic material prototype - command: uniaxialMaterial Elastic matID E
uniaxialMaterial Elastic 1 3000

# 
# Define elements
#

# Create truss elements - command: element truss trussID node1 node2 A matID
element Truss 1 1 4 10.0 1
element Truss 2 2 4 5.0 1
element Truss 3 3 4 1
        
# Define loads
# ------------
#

# create a Linear TimeSeries with a tag of 1
timeSeries Linear 1
    
# Create a Plain load pattern associated with the TimeSeries: command pattern Plain $patternTag $timeSeriesTag { load commands }

pattern Plain 1 1 {
	
   # Create the nodal load - command: load nodeID xForce yForce
   load 4 100 -50
}

Analysis

We will now show the commands to perform a static analysis using a linear solution algorithm The model is linear, so we use a solution Algorithm of type Linear. Even though the solution is linear, we have to select a procedure for applying the load which is called an Integrator. For this problem, a LoadControl integrator advances the solution. The equations are formed using a banded system so the System is BandSPD, banded symmetric positive definite This is a good choice for most small size models. The equations have to be numbered so the widely used RCM (Reverse Cuthill-McKee) numberer is used. The constraints are most easily represented with a Plain constraint handler. Once all the components of an analysis are defined, the Analysis object itself is created. For this problem, a Static Analysis object is used.

# Create the system of equation
system BandSPD
    
# Create the DOF numberer, the reverse Cuthill-McKee algorithm
numberer RCM
    
# Create the constraint handler, a Plain handler is used as homo constraints
constraints Plain

# Create the integration scheme, the LoadControl scheme using steps of 1.0
integrator LoadControl 1.0

# Create the solution algorithm, a Linear algorithm is created
algorithm Linear

# create the analysis object 
analysis Static 

Output Specification

For this analysis, we will record the displacement at node 4, and all the element forces expressed both in the global coordinate system and the local system.

# create a Recorder object for the nodal displacements at node 4
recorder Node -file example.out -time -node 4 -dof 1 2 disp

# create a Recorder for element forces, one for global system and the other for local system
recorder Element -file eleGlobal.out -time -ele 1 2 3 forces
recorder Element -file eleLocal.out  -time -ele 1 2 3 basicForces

Perform The Analysis

After the objects for the model, analysis and outut has been defined we now perform the analysis.

analyze 1


Print Information to Scree

In addition to using recorders, it is possible to specify output using the print and puts commands.

print node 4
print element
puts "node 4 displacement: [nodeSip 4]"

Results

When you run this script, you should see the following printed to the screen:



In addition, your directory should contain the following 3 files with the data shown: