NDMaterial Command: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
*[[Plane Strain Material]] | *[[Plane Strain Material]] | ||
*[[Plate Fiber Material]] | *[[Plate Fiber Material]] | ||
* [[Plane Stress Concrete Materials]] | |||
*Nonlinear, drained/undrained soil response under general 3D cyclic loading conditions | *Nonlinear, drained/undrained soil response under general 3D cyclic loading conditions | ||
**[[FluidSolidPorousMaterial]] | **[[FluidSolidPorousMaterial]] | ||
Revision as of 23:41, 28 January 2010
This command is used to construct an NDMAterial object which represents the stress-strain relationship at the gauss-point of a continuum element.
| ndMaterial matType? arg1? ... |
The type of material created and the additional arguments required depends on the matType? provided in the command.
NOTE:
The valid queries to any uniaxial material when creating an ElementRecorder are 'strain', and 'stress'. Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.
The following contain information about matType? and the args required for each of the available material types:
- Elastic Isotropic Material
- J2 Plasticity Material
- Plane Stress Material
- Plane Strain Material
- Plate Fiber Material
- Plane Stress Concrete Materials
- Nonlinear, drained/undrained soil response under general 3D cyclic loading conditions
- UCDavis Soil Models
- Template Elasto-Plastic Material