Reinforcing Steel Material

Contact Authors:	Jon Mohle M.S., P.E.
	Sashi Kunnath: http://cee.engr.ucdavis.edu/faculty/kunnath/kunnath.htm

This command is used to construct a ReinforcingSteel uniaxial material object. This object is intended to be used in a reinforced concrete fiber section as the steel reinforcing material.

uniaxialMaterial ReinforcingSteel $matTag $fy $fu $Es $Esh $esh $eult < -GABuck $lsr $beta $r $gama > < -DMBuck $lsr < $alpha >> < -CMFatigue $Cf $alpha $Cd > < -IsoHard <$a1 <$limit> > >

---

$matTag	integer tag identifying material
$matTag	unique material object integer tag
$fy	Yield stress in tension (see Figure 1)
$fu	Ultimate stress in tension
$Es	Initial elastic tangent
$Esh	Tangent at initial strain hardening
$esh	Strain corresponding to initial strain hardening
$eult	Strain at peak stress
-GABuck	Buckling Model Based on Gomes and Appleton (1997)
:$lsr	Slenderness Ratio (see Figure 2)
:$beta	Amplification factor for the buckled stress strain curve. (see Figure 3)
:$r	Buckling reduction factor r can be a real number between [0.0 and 1.0] r=1.0 full reduction (no buckling) r=0.0 no reduction 0.0<r<1.0 linear interpolation between buckled and unbuckled curves
:$gamma	Buckling constant (see Figures 3 and 4)