Reinforcing Steel Material: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{|
{|
|  style="width:150px valign:top;" | '''Contact Authors:''' || Jon Mohle M.S., P.E.
|  style="width:150px valign=top;" | '''Contact Authors:''' || Jon Mohle M.S., P.E.
|-
|-
|  || Sashi Kunnath: http://cee.engr.ucdavis.edu/faculty/kunnath/kunnath.htm
|  || Sashi Kunnath: http://cee.engr.ucdavis.edu/faculty/kunnath/kunnath.htm
Line 16: Line 16:


{|
{|
|  style="width:150px valign=top" | '''$matTag ''' || integer tag identifying material
|  style="width:150px valign=top;" | '''$matTag ''' || integer tag identifying material
|-
|-
|  '''$matTag''' || unique material object integer tag
|  '''$matTag''' || unique material object integer tag

Revision as of 05:38, 7 December 2009

Contact Authors: Jon Mohle M.S., P.E.
Sashi Kunnath: http://cee.engr.ucdavis.edu/faculty/kunnath/kunnath.htm


This command is used to construct a ReinforcingSteel uniaxial material object. This object is intended to be used in a reinforced concrete fiber section as the steel reinforcing material.

uniaxialMaterial ReinforcingSteel $matTag $fy $fu $Es $Esh $esh $eult < -GABuck $lsr $beta $r $gama > < -DMBuck $lsr < $alpha >> < -CMFatigue $Cf $alpha $Cd > < -IsoHard <$a1 <$limit> > >

$matTag integer tag identifying material
$matTag unique material object integer tag
$fy Yield stress in tension (see Figure 1)
$fu Ultimate stress in tension
$Es Initial elastic tangent
$Esh Tangent at initial strain hardening
$esh Strain corresponding to initial strain hardening
$eult Strain at peak stress
-GABuck Buckling Model Based on Gomes and Appleton (1997)
$lsr Slenderness Ratio (see Figure 2)
$beta Amplification factor for the buckled stress strain curve. (see Figure 3)
$r Buckling reduction factor

r can be a real number between [0.0 and 1.0]

r=1.0 full reduction (no buckling)

r=0.0 no reduction

0.0<r<1.0 linear interpolation between buckled and unbuckled curves

$gamma Buckling constant (see Figures 3 and 4)