BuildingTcl -- addLoadCombination

Commands

addLoadCombinationData LoadCombinationLabel $LoadCombinationLabel

addLoadCombinationData LoadCombinationDescription "$LoadCombinationDescription"

addLoadCombinationData LoadCombinationModelLabel $LoadCombinationModelLabel

addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel1 <LoadFactor $LoadFactorGravity1> <InertialMassFactor $InertialMassFactorGravity1>

<addLoadCombinationData -GravityLoad LoadLabel $GravityLoadLabel2 <LoadFactor $LoadFactorGravity2> <InertialMassFactor $InertialMassFactorGravity2> >

...

<addLoadCombinationData -GravityLoad AnalysisModelLabel $GravityAnalysisModelLabel1 <Nstep $NstepGravity> <Tolerance $ToleranceGravity>>

<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel1 <AnalysisModelLabel $LateralAnalysisModelLabel1> <$LateralLoadArgumentLabel1a $LateralLoadArgumentValue1a> <$LateralLoadArgumentLabel1b $LateralLoadArgumentValue1b> ... >

<addLoadCombinationData -LateralLoad LoadLabel $LateralLoadLabel2 <AnalysisModelLabel $LateralAnalysisModelLabel2> <$LateralLoadArgumentLabel2a $LateralLoadArgumentValue2a> <$LateralLoadArgumentLabel2b $LateralLoadArgumentValue2b> ... >

...

<addLoadCombinationData InertialMassFactor $InertialMassFactor >

addLoadCombination

Arguments

$LoadCombinationLabel

Unique LoadCombination Label for reference

$LoadCombinationDescription

Bracketed text. Optional, default: blank {}

$LoadCombinationModelLabel

Specifies which LoadCombinationModel is being used. Currently, Optional, default: DefaultLoadCombinationModel

$GravityLoadLabel1 ...

Previously-defined Gravity Load Label, specified within the model.

At leaset one GravityLoadLabel must be specified in each LoadCombination.

$LoadFactorGravity1 ...

Scaling factor for GravityLoadLabel1. Optional, default=1.0

$InertialMassFactorGravity1 ...

Inertial-Mass factor for GravityLoadLabel1. Optional, default=1.0

$GravityAnalysisModelLabel

Previously-defined AnalysisModelLabel, used in performing load-controlled gravity analysis : Optional, default= DefaultLoadControl

NstepGravity

Number of step to be taken in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel

ToleranceGravity

Convergence-test tolerance used in gravity-load analysis. This value supersedes what has been specified in the analysis model $GravityAnalysisModelLabel

Notes

The addLoadCombination command must be placed at the end of each LoadCombination-data definition, as it takes all data defined since the last addLoadCombination command and define the LoadCombination.

Options

• BuildingTcl -- LoadCombinationModelLabel

---

Return to BuildingTcl Command Language Manual