BuildingTclViewer User Manual: Difference between revisions
Jump to navigation
Jump to search
| Line 24: | Line 24: | ||
There are three choices: | There are three choices: | ||
*'''New''' -- Start the input file from scratch | |||
*'''Load''' (Recommended) -- Load an existing BuildingTcl script. | |||
*'''Exit''' -- Exit program without saving to user-specified input file. | |||
'''[[BuildingTclViewer File Menu|More about BuildingTclViewer File Menu]]''' | '''[[BuildingTclViewer File Menu|More about BuildingTclViewer File Menu]]''' | ||
Revision as of 20:56, 28 December 2009
Run BuildingTclViewer
- myBuildingTclviewer.tcl – BuildingTcl with graphical interface
- Incorporates BuildingTcl & BuildingTclviewer commands into the Tcl/Tk Interpreter
- This file needs to be sourced from the OpenSeesTk.exe prompt, or by double-clicking on the BuildingTclViewer.bat file
- 1. Run from OpenSeesTk Prompt
- a. Run OpenSeesTk.exe – a Tk window opens up (do not close it).
- b. Source myBuildingTclviewer.tcl at the OpenSees prompt
- the Tk window becomes the BuildingTclviewer
Or
- 2. Double-click on myBuildingTclviewer.bat
Startup: File Menu
To start using BuildingTclViewer, select the File Menu in the menu bar.
There are three choices:
- New -- Start the input file from scratch
- Load (Recommended) -- Load an existing BuildingTcl script.
- Exit -- Exit program without saving to user-specified input file.
More about BuildingTclViewer File Menu