BuildingTcl -- addLoad: LoadTypeLabel LateralPushover: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 21: | Line 21: | ||
;$LoadDescription : Text. Optional, default = blank {} | ;$LoadDescription : Text. Optional, default = blank {} | ||
;$LateralDirection : . Optional, default = X | ;$LateralDirection : Lateral-displacement direction. Optional, default = X | ||
:Options | |||
::*X | |||
::*Y | |||
::*Z (3D only) | |||
::*rotX (3D only) | |||
::*rotY (3D only) | |||
::*rotZ | |||
;$CycleType: Pushover cycle type. Optional, default = Push | ;$CycleType: Pushover cycle type. Optional, default = Push | ||
:Options | :Options |
Latest revision as of 03:58, 12 November 2009
![](/wiki/images/a/a5/BuildingTclLogo.gif)
Commands
- addLoadData LoadLabel $LoadLabel
- addLoadData LoadTypeLabel LateralPushover
- addLoadData DMax $DMax
- <addLoadData LoadDescription $LoadDescription>
- <addLoadData LateralDirection $LateralDirection>
- <addLoadData CycleType $CycleType>
- <addLoadData NCycles $NCycles>
- <addLoadData ControlNodeFloor $ControlNodeFloor>
- <addLoadData ScaleFactor $ScaleFactor>
- <addLoadData LateralLoadDistribution $LateralLoadDistribution>
- addLoad
Arguments
- $LoadLabel
- Unique Load Label for reference
- $LoadDescription
- Text. Optional, default = blank {}
- $LateralDirection
- Lateral-displacement direction. Optional, default = X
- Options
- X
- Y
- Z (3D only)
- rotX (3D only)
- rotY (3D only)
- rotZ
- $CycleType
- Pushover cycle type. Optional, default = Push
- Options
- Push (0 1)
- Full (0 1 0 -1 0)
- Half (0 1 0)
- $NCycles
- Number of cycles. Optional, default = 1
- $ControlNodeFloor
- Floor location fo displacement-control node. Optional, default = top
- $ScaleFactor
- Scale Factor. Optional, default = 1.0
- $LateralLoadDistribution
- Lateral-load distribution along height. Optional, default = Linear
- Options
- Linear
Notes
The addLoad command must be placed at the end of each Load-data definition, as it takes all data defined since the last addLoad command and define the Load.
Options
Return to BuildingTcl Command Language Manual