BuildingTcl -- addLoad: LoadTypeLabel Gravity: Difference between revisions

Latest revision as of 06:06, 1 November 2009

Commands

addLoadData LoadLabel $LoadLabel

addLoadData LoadTypeLabel Gravity

addLoad

Arguments

$LoadLabel: Unique Load Label for reference
$LoadDescription: Text. Optional, default = blank {}
$InertialMassFactor: Inertial Mass Factor used to scale the gravity loads for inertial masses (to represent gravity-frame inertial-mass). Optional, default = 1.0

Notes

The addLoad command must be placed at the end of each Load-data definition, as it takes all data defined since the last addLoad command and define the Load.

Options

BuildingTcl -- addLoad

Return to BuildingTcl Command Language Manual

@@ Line 5: / Line 5: @@
 :addLoadData LoadLabel $LoadLabel
 :addLoadData LoadTypeLabel Gravity
-:addLoadData LoadDescription $LoadDescription
+:<addLoadData LoadDescription $LoadDescription>
-:addLoadData $RequiredArgument1Label $RequiredArgument1Value
+:<addLoadData InertialMassFactor $InertialMassFactor>
-:addLoadData $RequiredArgument2Label $RequiredArgument2Value
-:…
-:<addLoadData $InputArgument1Label $InputArgument1Value>
-:<addLoadData $InputArgument2Label $InputArgument2Value>
-:…
 :'''addLoad'''
@@ Line 18: / Line 13: @@
 ;$LoadLabel :	Unique Load Label for reference
-;$LoadTypeLabel :	Specifies which LoadType is being used.
 ;$LoadDescription :	Text. Optional, default = blank {}
+;$InertialMassFactor: Inertial Mass Factor used to scale the gravity loads for inertial masses (to represent gravity-frame inertial-mass). Optional, default = 1.0
-;$RequiredArgument1Label $RequiredArgument1Value ... :Labels and corresponding values for LoadModel-specific required argument.
-;$InputArgument1Label $InputArgument1Value … :	Labels and corresponding values for LoadModel-specific Input Arguments (Optional)