BuildingTcl -- addSection: Difference between revisions

Latest revision as of 18:00, 7 January 2010

Commands

addSectionData SectionLabel $SectionLabel

addSectionData SectionModelLabel $SectionModelLabel

addSectionData $RequiredArgument1Label $RequiredArgument1Value

addSectionData $RequiredArgument2Label $RequiredArgument2Value

…

…

addSection

Different SectionModels have different input arguments:

Arguments

$SectionLabel: Unique Analysis Label for reference

$SectionModelLabel: Specifies which SectionModel is being used.

$RequiredArgument1Label $RequiredArgument1Value ...: Labels and corresponding values for SectionModel-specific required argument.

$InputArgument1Label $InputArgument1Value …: Labels and corresponding values for SectionModel-specific Input Arguments (Optional)

Notes

The addSection command must be placed at the end of each Section-data definition, as it takes all data defined since the last addSection command and define the Section.

Options

Examples

BuildingTcl -- addElementType

Return to BuildingTcl Command Language Manual

@@ Line 1: / Line 1: @@
-* [[BuildingTcl -- ]]
+__NOTOC__
+[[Image:BuildingTclLogo.gif|link=BuildingTcl|right]]
+==Commands ==
+:addSectionData SectionLabel $SectionLabel
+:addSectionData SectionModelLabel $SectionModelLabel
+:addSectionData $RequiredArgument1Label $RequiredArgument1Value
+:addSectionData $RequiredArgument2Label $RequiredArgument2Value
+:…
+:<addSectionData $InputArgument1Label $InputArgument1Value>
+:<addSectionData $InputArgument2Label $InputArgument2Value>
+:…
+:'''addSection'''
+Different SectionModels have different input arguments:
+:*[[BuildingTcl -- addSection: SectionModelLabel Elastic]]
+:*[[BuildingTcl -- addSection: SectionModelLabel ElasticRectangular]]
+:*[[BuildingTcl -- addSection: SectionModelLabel RCRectangularFiber]]
+:*[[BuildingTcl -- addSection: SectionModelLabel AISCWideFlangeElastic]]
+:*[[BuildingTcl -- addSection: SectionModelLabel AISCWideFlangeFiber]]
+:*[[BuildingTcl -- addSection: SectionModelLabel CustomWideFlangeElastic]]
+:*[[BuildingTcl -- addSection: SectionModelLabel CustomWideFlangeFiber]]
+:*[[BuildingTcl -- addSection: SectionModelLabel ColumnHinge]]
+==Arguments ==
+;$SectionLabel :	Unique Analysis Label for reference
+;$SectionModelLabel :	Specifies which SectionModel is being used.
+;$RequiredArgument1Label $RequiredArgument1Value ... :Labels and corresponding values for SectionModel-specific required argument.
+;$InputArgument1Label $InputArgument1Value … :	Labels and corresponding values for SectionModel-specific Input Arguments (Optional)
+==Notes ==
+The addSection command must be placed at the end of each Section-data definition, as it takes all data defined since the last addSection command and define the Section.
+==Options ==
+== Examples ==
+*[[BuildingTcl -- addSection Examples -- Elastic Sections]]
+*[[BuildingTcl -- addSection Examples -- Structural-Steel Sections]]
+*[[BuildingTcl -- addSection Examples -- Reinforced-Concrete Sections]]
 ----
+[[BuildingTcl -- addElementType]]
-[[Return to BuildingTcl]]
+Return to [[BuildingTcl Command Language Manual]]