LimitCurve units

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
IQRALATIF
Posts: 1
Joined: Thu Feb 18, 2021 10:01 pm

LimitCurve units

Post by IQRALATIF »

In the source code/files of ShearCurve.cpp, ShearCurve.h, RotationShearCurve.h, and RotationShearCurve.cpp, the units explicitly mentioned are psi and kips. However, the demonstration manual states that these functions can take input in both psi and MPa units.

Link to source codes: https://github.com/OpenSees/OpenSees/tr ... imitCurve
Link to manual : https://opensees.berkeley.edu/wiki/imag ... Manual.pdf

Can you please clarify which units should be used while using these functions?
Post Reply