Simple fixed beam question

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
gooddaytogo
Posts: 23
Joined: Fri Mar 01, 2019 7:15 pm
Location: Texas Tech University

Simple fixed beam question

Post by gooddaytogo »

I am trying to STKO's new diagram plot feature, so I just built a fixed beam to test the results. But when I fix all DOFs of node 1 and node 2, the OpenSees can not output any results. Does anyone know how to deal with it?

fix 1 1 1 1 1 1 1;
fix 2 1 1 1 1 1 1;
Ashok
Posts: 50
Joined: Tue Feb 19, 2019 8:59 pm
Location: IITM

Re: Simple fixed beam question

Post by Ashok »

Hi,
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.
selimgunay
Posts: 916
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Simple fixed beam question

Post by selimgunay »

Do you have any distributed loads on your beam?
gooddaytogo
Posts: 23
Joined: Fri Mar 01, 2019 7:15 pm
Location: Texas Tech University

Re: Simple fixed beam question

Post by gooddaytogo »

Ashok wrote: Sat Nov 28, 2020 5:47 pm Hi,
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.
Thanks, it is very helpful.
Post Reply