double curvature test

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
mohammmad
Posts: 45
Joined: Tue Aug 21, 2018 4:10 am
Contact:

double curvature test

Post by mohammmad »

I have read the report "Shear-Flexure Interaction Modeling for Reinforced Concrete Structural Walls and Columns under Reversed Cyclic Loading".
In this report, it is mentioned that analytical models of column specimens were generated in OpenSees using the SFI-MVLEM model elements.
Three of the four specimens were tested under double curvature, whereas only Specimen #2 (Table 3.1, Shanmugam [2009]) was tested in a single curvature.
How can we model a double curvature test with SFI-MVLEM?
Can anyone share a code for modeling a double curvature test with OpenSees?
Does anyone have a code for modeling a double curvature test with SFI-MVLEM?
ahmadbsr
Posts: 29
Joined: Thu Feb 28, 2019 5:43 am
Location: shahid chamran

Re: double curvature test

Post by ahmadbsr »

mohammmad wrote: Sun Jul 21, 2019 12:36 am I have read the report "Shear-Flexure Interaction Modeling for Reinforced Concrete Structural Walls and Columns under Reversed Cyclic Loading".
In this report, it is mentioned that analytical models of column specimens were generated in OpenSees using the SFI-MVLEM model elements.
Three of the four specimens were tested under double curvature, whereas only Specimen #2 (Table 3.1, Shanmugam [2009]) was tested in a single curvature.
How can we model a double curvature test with SFI-MVLEM?
Can anyone share a code for modeling a double curvature test with OpenSees?
Does anyone have a code for modeling a double curvature test with SFI-MVLEM?
Can i model the Shear wall in the bay of frame with SFI method ?
mohammmad
Posts: 45
Joined: Tue Aug 21, 2018 4:10 am
Contact:

Re: double curvature test

Post by mohammmad »

ahmadbsr wrote: Thu Jun 25, 2020 2:29 am
mohammmad wrote: Sun Jul 21, 2019 12:36 am I have read the report "Shear-Flexure Interaction Modeling for Reinforced Concrete Structural Walls and Columns under Reversed Cyclic Loading".
In this report, it is mentioned that analytical models of column specimens were generated in OpenSees using the SFI-MVLEM model elements.
Three of the four specimens were tested under double curvature, whereas only Specimen #2 (Table 3.1, Shanmugam [2009]) was tested in a single curvature.
How can we model a double curvature test with SFI-MVLEM?
Can anyone share a code for modeling a double curvature test with OpenSees?
Does anyone have a code for modeling a double curvature test with SFI-MVLEM?
Can i model the Shear wall in the bay of frame with SFI method ?
Yes you can model shear wall in the bay of frame with SFI method.
Post Reply