Some que. aboat OSP and GroundMotion

[lishhit]

I want to use the OSP

follow information gives:

fist:
NodeRecorder::NodeRecorder - dataToStore tempFile0.tmpnot recognized (disp, vel,
accel, incrDisp, incrDeltaDisp)
NodeRecorder::NodeRecorder - dataToStore tempFile1.tmpnot recognized (disp, vel,
accel, incrDisp, incrDeltaDisp)
NodeRecorder::NodeRecorder - dataToStore tempFile2.tmpnot recognized (disp, vel,
accel, incrDisp, incrDeltaDisp)

second:
Use natural column ordering.
WARNING: GroundMotion::getVel(double time) - integration is required to get the
ground velocities from the ground accelerations
WARNING:GroundMotion::integrate() - no TimeSeriesIntegrator provided - will use
Trapezoidal.

I don't kown why

[fmk]

you have the nodeRecorder command incorrect .. suggest you look at the manual, if you can't figure it out post the command you are using.

for multi-support excitations we suggest you always provide the actual displacement record instead of the acceleration record when defining a ground motion .. otherwise we use trapezoidal integration twice (onc to get the vel, and again to get the disp)