soil structure interaction

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
liuza
Posts: 4
Joined: Tue May 05, 2015 10:49 pm
Location: Kharazmi University

soil structure interaction

Post by liuza »

Hi
I need an example about 3D soil structure interaction
can any one help me?
Thanks alot
barkhordari
Posts: 11
Joined: Wed May 06, 2015 10:49 am
Location: aut

Re: soil structure interaction

Post by barkhordari »

do you find any thing?
tylerpra
Posts: 1
Joined: Tue Nov 03, 2015 1:54 am

Re: soil structure interaction

Post by tylerpra »

Our approach to regional earthquake simulation
has been to use an innovative multi
-
scale method. The regional
ground motion simulation is uncoupled from the subregional analysis that includes the detailed models of
nonlinear soils, foundations, and building i
robertwillis
Posts: 1
Joined: Sun Dec 13, 2015 8:49 pm

Re: soil structure interaction

Post by robertwillis »

To simulate the interaction between a structure and soil you can apply interface elements. Without an interface the structure and the soil are tied together:
no relative displacement (slipping/gapping) is possible between structure and soil. By using an interface, node pairs are created at the interface of structure and soil. From a node pair, one node belongs to the structure and the other node belongs to the soil. The interaction between these two nodes consists of two elastic-perfectly plastic springs. One elastic-perfectly plastic spring to model the gap displacement and one elastic-perfectly plastic spring to model slip displacement. I got essay writing task for this topic as part of my geology studies. I got these kind of useful answer from admission essay writing service @ http://www.clazwork.com/admission-uk-es ... ice-connor
barkhordari
Posts: 11
Joined: Wed May 06, 2015 10:49 am
Location: aut

Re: soil structure interaction

Post by barkhordari »

robertwillis wrote:
> To simulate the interaction between a structure and soil you can apply
> interface elements. Without an interface the structure and the soil are
> tied together:
> no relative displacement (slipping/gapping) is possible between structure
> and soil. By using an interface, node pairs are created at the interface of
> structure and soil. From a node pair, one node belongs to the structure and
> the other node belongs to the soil. The interaction between these two nodes
> consists of two elastic-perfectly plastic springs. One elastic-perfectly
> plastic spring to model the gap displacement and one elastic-perfectly
> plastic spring to model slip displacement. I got essay writing task for
> this topic as part of my geology studies. I got these kind of useful answer
> from admission essay writing service @
> http://www.clazwork.com/admission-uk-es ... ice-connor



Please see this post
http://opensees.berkeley.edu/community/ ... =2&t=63051
Post Reply