Staged construction of earth dam

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
koorosh
Posts: 10
Joined: Thu Nov 07, 2013 11:49 pm
Location: Tehran

Staged construction of earth dam

Post by koorosh »

Hi,
Does any body know how can i model staged construction for an earth dam and its effect on pore pressure and settlement with opensees?
Is there any example of staged construction?
Thank you so much for your help.
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Staged construction of earth dam

Post by fmk »

the only example i have on staged construction is one from Pedro Arduino for a sheet pile wall.
http://opensees.berkeley.edu/wiki/index ... _Pile_Wall

basically you can add or remove anything after an analysis has been completed if elements have been written to do so (i.e. when add element to deformed body it will not have any initial strains if some of nodes have some existing displacement).
Post Reply