ver 2.2.1

yalham · Post by **yalham** » Sat Jul 31, 2010 4:22 pm

Dear Silvia,

I cannot execute OpenSEES ver. 2.2.1 on windows-XP. I checked it on an old PC and a new laptop. In both I had problem with XP, but it is okay on windows7. Is it a general case?

Thanks, best regards

Post by **fmk** » Mon Aug 02, 2010 9:41 am

what error are you getting?

yalham · Post by **yalham** » Tue Aug 03, 2010 9:51 am

sorry for delay

error is some thing like this:

"This application has failed to start because the application configuration is incorrect"

see the following link:

[url]http://sites.google.com/site/arhatami/H ... edirects=0[/url]

Thanke you.

yalham · Post by **yalham** » Tue Aug 03, 2010 3:00 pm

also when I use tcleditor this is the message:
"The system can not execute the specified program"

Post by **fmk** » Wed Aug 04, 2010 10:06 am

i cannot get this error to occur on the machines i have access to .. there may be a fix, but as i cannot duplicate it i cannot tell if the fix will work .. it only seems to effect certain xp users.

would you be interested in checking to see if this fix will work:

[url]
http://www.microsoft.com/downloads/deta ... laylang=en
[/url]

yalham · Post by **yalham** » Fri Aug 06, 2010 3:18 am

Thanks for reply,
I installed Microsoft Visual C++ 2005 Redistributable Package but it does not help. Is it related to Microsoft, and if yes what should I ask them.

koduru · Post by **koduru** » Tue Aug 10, 2010 7:22 am

I have the same problem with running OpenSees 2.2.1 on Windows 7 (x64).

The error reads
"The application was unable to start correctly (0xc000007b)."

Any help is much appreciated.

yalham · Post by **yalham** » Tue Oct 05, 2010 11:01 am

recentaly I got ver. 2.2.2, it is okay on mu PC, windos-XP