Error in Barslip Material

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
hnaderi
Posts: 15
Joined: Sat May 25, 2013 11:44 am

Error in Barslip Material

Post by hnaderi »

Hello Moderators

I've created RC frame with beam column joint element and I've used barslip material for barslip springs.

http://opensees.berkeley.edu/wiki/index ... P_Material
uniaxialMaterial BarSlip $matTag $fc $fy $Es $fu $Eh $db $ld $nb $depth $height <$ancLratio> $bsFlag $type <$damage $unit>

When I define value for anchorage length ratio <$ancLratio> (for example 0.8 ) , OpenSees2.4.0.exe stops and shows error.
This parameter is not defined for it.

I've used the following command:
uniaxialMaterial BarSlip $Col111BL 23.0 526.3 210000.0 616.3 1221.17 14.0 400.0 3 400.0 260.0 0.8 "Strong" "column" "NoDamage" "Mpa"
When I omit 0.8 (the anchorage length ratio) from upper line, The program runs without error.

What is the problem ?
Does OpenSees 2.4.0 puts this value as default 1.0 ?
hnaderi
Posts: 15
Joined: Sat May 25, 2013 11:44 am

Re: Error in Barslip Material

Post by hnaderi »

All versions of OpenSees.exe from 1.7.1 to 2.4.0 have this error.
why ?

please help me.
Post Reply