Error in input ground motion

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
mja165
Posts: 18
Joined: Wed Sep 28, 2011 3:53 pm

Error in input ground motion

Post by mja165 »

Hi Vesna,

I get this error:
Warning invalid cFactor 966.0 {-Series -factor ...}
alloc: invalid block:032690C0: c0 3
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.

And this is the part of the code which this error occurs:

# define constant facfor for applied velocity
set cFactor [expr $rockDen*$rockVS]

# define velocity time history file
set velocityFile $record

# timeseries object for force history
set mSeries "Path -dt $motionDT -filePath $velocityFile -factor $cFactor"

puts " ! ! ! Load Pattern built ! ! ! "
# loading object
pattern Plain 10 $mSeries{
load 1 1.0 0.0
}
puts "Dynamic loading created..."


Would you be kind to give me any hints about the error?
vesna
Posts: 3033
Joined: Tue May 23, 2006 11:23 am
Location: UC Berkeley

Re: Error in input ground motion

Post by vesna »

It looks like there is a problem with the value of $cFactor.

Use puts command to see the value of $cFactor.
Post Reply