eigen analysis with or without gravityloads

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
caosasa
Posts: 26
Joined: Sat Aug 07, 2010 5:31 am
Location: tongji

eigen analysis with or without gravityloads

Post by caosasa »

Dear all,
i find a strange phenomenon.
for the eigen analysis,
the period is smaller when the eigen analysis of a structure is conducted with gravityloads,
compared with the period when the eigen analysis of a structure is conducted without gravityloads.
the "Ex3.Canti2D.build.InelasticFiberSection" is adopted.
i think when the gravityloads are included,
the structure should be stiffer.
consequently,
the period should be smaller, not bigger.
can anyone explain this problem?
Thanks.
vesna
Posts: 3033
Joined: Tue May 23, 2006 11:23 am
Location: UC Berkeley

Re: eigen analysis with or without gravityloads

Post by vesna »

From what you are saying I am not sure what was your observation. However, some of materials need some load to correctly configure the stiffness. I would relay on periods calculated after gravity load was applied on the structure.
caosasa
Posts: 26
Joined: Sat Aug 07, 2010 5:31 am
Location: tongji

Re: eigen analysis with or without gravityloads

Post by caosasa »

Dear Vesna,
Thank you very much. You are very warmhearted.
The phenomenon i am saying is:
The periods that calculated after gravity load is longer than the periods that calculated before gravity load.
I think after the gravityloads are counted,
the structure should be stiffer.
consequently,
the period should be shorter, not longer.
I think you already explained the problem.
The reason is"some of materials need some load to correctly configure the stiffness".
Thank you again.
vesna
Posts: 3033
Joined: Tue May 23, 2006 11:23 am
Location: UC Berkeley

Re: eigen analysis with or without gravityloads

Post by vesna »

Irrespective of how OpenSees handles materials and establishes the stiffness here is my general comment on change of stiffness with a load applied on the structure. After you apply gravity load on the structure minor cracks may develop in its elements (especially if it is a RC structure) which will lead to structure softening and thus smaller stiffness and longer period.
caosasa
Posts: 26
Joined: Sat Aug 07, 2010 5:31 am
Location: tongji

Re: eigen analysis with or without gravityloads

Post by caosasa »

Thank you, Vesna.
I am very clear now.
Post Reply