pushover curve

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
samcivil
Posts: 30
Joined: Tue Apr 17, 2012 10:57 pm
Location: Mohaghegh Ardabili University
Contact:
Contact samcivil

pushover curve

Post by samcivil »

Hello.folks.
How could we obtain the pushover curve in opensees.
Mohaghegh University/Iran
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Re: pushover curve

Post by fmk »

built the model, create a recorder, analyze the model and then when done use matlab or octave to plot the results in the recorders output file.
Top
tazarv
Posts: 44
Joined: Sun Dec 09, 2007 6:08 am
Location: University of Nevada Reno
Contact:
Contact tazarv

Re: pushover curve

Post by tazarv »

There are several examples that you can start with. The link will direct you to one of those:
http://opensees.berkeley.edu/wiki/index ... r_Analysis
Mostafa Tazarv
Top
samcivil
Posts: 30
Joined: Tue Apr 17, 2012 10:57 pm
Location: Mohaghegh Ardabili University
Contact:
Contact samcivil

Re: pushover curve

Post by samcivil »

Hollo,
Thanks alot.
Mohaghegh University/Iran
Top
Post Reply

Return to “OpenSees.exe Users”