OpenSees Geotechnical Simulation Capabilities

A forum dedicated to users with questions regarding soil materials and elements.

forum currently locked

Moderator: Moderators

Locked
Carlota Gama
Posts: 22
Joined: Mon Oct 12, 2009 9:23 am
Location: Universidade Nova de Lisboa

OpenSees Geotechnical Simulation Capabilities

Post by Carlota Gama »

Hello,

My name is Carlota Gama, I'm a Civil Engeneering student in the New University of Lisbon and I have a doubt about the stress record in example 15 in the OpenSees Geotechnical Simulation Capabilities. Supposedly the stress output should follow the order: Txx, Tyy, Tzz, Txy and nr. However, the stress output in the example 15 only gives three values for this parameter. Can you please explain me why this happens?


Thank you for you time.
Best regards,

Carlota Gama
jinlu
Posts: 47
Joined: Fri Jul 14, 2006 5:50 pm
Location: UC San Diego

Re: OpenSees Geotechnical Simulation Capabilities

Post by jinlu »

FluidSolidPorous Material are currently being updated. Please use OpenSees ver 2.1.0 or earlier versions if you want to use FluidSolidPorous Material.
BorZmisy
Posts: 1
Joined: Sat Sep 03, 2011 2:19 pm
Contact:

Biuty

Post by BorZmisy »

Biuty

It is possible to tell, this exception :)
Veinejire
Posts: 1
Joined: Tue Sep 06, 2011 1:04 pm
Location: Thailand
Contact:

Ive been exploring for a little for any high quality article

Post by Veinejire »

Exploring in Yahoo I ultimately stumbled upon this web site. [url=http://babymonitorsguide.org/Rate-Baby-Monitors-96.html]Rate Baby Monitors[/url]
Studying this information So iЎ¦m satisfied to express that I've an incredibly excellent uncanny feeling I found out just what I needed. I most without a doubt will make certain to do not disregard this site and provides it a look on a continuing basis.
Locked