"Makefile.def" for Ubuntu 9.04

For developers writing C++, Fortran, Java, code who have questions or comments to make.

Moderators: silvia, selimgunay, Moderators

Post Reply
tperea
Posts: 9
Joined: Thu Feb 02, 2006 7:40 pm
Location: UAM

"Makefile.def" for Ubuntu 9.04

Post by tperea »

Notes:

* Unpack "OpenSees2.1.0.tar.gz" in $HOME (or /home/Ubuntu_Username)

* Need "bin" and "lib" folders in $HOME

* Makefile.def should be in $HOME/OpenSees/ (~/OpenSees$)

* Some libraries may be needed. To install them, open a terminal window and write the following command:

~/$ sudo aptitude -y install build-essential gfortran gfortran-4.3 libatk1.0-dev libcairo2-dev libdirectfb-dev libdirectfb-extra libexpat1-dev libfontconfig1-dev libfreetype6-dev libgfortran3 libgl1-mesa-dev libglu1-mesa libglu1-mesa-dev libgtk2.0-dev libice-dev libjpeg62-dev libpango1.0-dev libpixman-1-dev libpng12-dev libpthread-stubs0 libpthread-stubs0-dev libsm-dev libsysfs-dev libx11-dev libxau-dev libxcb1-dev libxcb-render0-dev libxcb-render-util0-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxft-dev libxi-dev libxinerama-dev libxrandr-dev libxrender-dev libxss-dev mesa-common-dev tcl8.5 tcl8.5-dev tcllib tk8.5 tk8.5-dev x11proto-composite-dev x11proto-core-dev x11proto-damage-dev x11proto-fixes-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev x11proto-scrnsaver-dev x11proto-xext-dev x11proto-xinerama-dev xtrans-dev zlib1g-dev

* To compile OpenSees, open the terminal, go to the OpenSees folder, make sure you have the right Makefile.def in this folder (like the one below), and then write the command "make" to start compiling:

~/OpenSees$ make

* If everything goes fine, the executable OpenSees for Ubuntu should be created in the "bin" folder.


------ MAKEFILE.def (file may need to be changed in the right format) ------

############################################################################
#
# Program: OpenSees
#
# Purpose: A Top-level Makefile to create the libraries needed
# to use the OpenSees framework. Works on Linux version 6.1
# and below.
#
# Written: fmk
# Created: 10/99
#
# Send bug reports, comments or suggestions to fmckenna@ce.berkeley.edu
#
############################################################################

# %---------------------------------%
# | SECTION 1: PROGRAM |
# %---------------------------------%
#
# Specify the location and name of the OpenSees interpreter program
# that will be created (if this all works!)

OpenSees_PROGRAM = $(HOME)/bin/OpenSees

OPERATING_SYSTEM = LINUX
GRAPHICS = UsingOpenGL
PROGRAMMING_MODE = SEQUENTIAL
DEBUG_MODE = NO_DEBUG
RELIABILITY = NO_RELIABILITY


# %---------------------------------%
# | SECTION 2: PATHS |
# %---------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries or if you have
# any of the libraries already leave the directory location blank AND
# remove the directory from DIRS.

BASE = /usr
HOME = /home/"UBUNTU USERNAME"/
FE = $(HOME)/OpenSees/SRC

BLASdir = $(HOME)/OpenSees/OTHER/BLAS
CBLASdir = $(HOME)/OpenSees/OTHER/CBLAS
LAPACKdir = $(HOME)/OpenSees/OTHER/LAPACK
SUPERLUdir = $(HOME)/OpenSees/OTHER/SuperLU_3.0/SRC
ARPACKdir = $(HOME)/OpenSees/OTHER/ARPACK
UMFPACKdir = $(HOME)/OpenSees/OTHER/UMFPACK
METISdir = $(HOME)/OpenSees/OTHER/METIS
SRCdir = $(HOME)/OpenSees/SRC


DIRS = $(BLASdir) $(CBLASdir) $(LAPACKdir) \
$(SUPERLUdir) $(ARPACKdir) $(UMFPACKdir) $(SRCdir) $(METISdir)

# %-------------------------------------------------------%
# | SECTION 3: LIBRARIES |
# | |
# | The following section defines the libraries that will |
# | be created and/or linked with when the libraries are |
# | being created or linked with. |
# %-------------------------------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries leave the
# libraries blank. You have to get your own copy of the tcl/tk
# library!!
#
# Note: For libraries that will be created (any in DIRS above)
# make sure the directory exsists where you want the library to go!

FE_LIBRARY = $(HOME)/lib/libOpenSees.a
NDARRAY_LIBRARY = $(HOME)/lib/libndarray.a # BJ_UCD jeremic@ucdavis.edu
MATMOD_LIBRARY = $(HOME)/lib/libmatmod.a # BJ_UCD jeremic@ucdavis.edu
BJMISC_LIBRARY = $(HOME)/lib/libBJmisc.a # BJ_UCD jeremic@ucdavis.edu
LAPACK_LIBRARY = $(HOME)/lib/libLapack.a
BLAS_LIBRARY = $(HOME)/lib/libBlas.a
SUPERLU_LIBRARY = $(HOME)/lib/libSuperLU.a
CBLAS_LIBRARY = $(HOME)/lib/libCBlas.a
ARPACK_LIBRARY = $(HOME)/lib/libArpack.a
UMFPACK_LIBRARY = $(HOME)/lib/libUmfpack.a
METIS_LIBRARY = $(HOME)/lib/libMetis.a

TCL_LIBRARY = /usr/lib/libtk8.5.so /usr/lib/libX11.so /usr/lib/libtcl8.5.so

BLITZ_LIBRARY = $(HOME)/blitz/lib/libblitz.a

ifeq ($(GRAPHICS), UsingX11)
GRAPHIC_LIBRARY = -L/usr/lib/libX11.so
else
GRAPHIC_LIBRARY = -L/usr/lib -lX11 -lGL -lGLU
endif

# WATCH OUT .. These libraries are removed when 'make wipe' is invoked.
WIPE_LIBS = $(FE_LIBRARY) \
$(LAPACK_LIBRARY) \
$(BLAS_LIBRARY) \
$(CBLAS_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(ARPACK_LIBRARY) \
$(UMFPACK_LIBRARY) \
$(METIS_LIBRARY)

# %---------------------------------------------------------%
# | SECTION 4: COMPILERS |
# | |
# | The following macros specify compilers, linker/loaders, |
# | the archiver, and their options. You need to make sure |
# | these are correct for your system. |
# %---------------------------------------------------------%

# Compilers
CC++ = /usr/bin/g++
CC = /usr/bin/gcc
FC = /usr/bin/gfortran

AR = ar
ARFLAGS = cqls
RANLIB = ranlib
RANLIBFLAGS =

# Compiler Flags
#
# NOTES:
# C++ FLAGS TAKE need _UNIX or _WIN32 for preprocessor dircetives
# - the _WIN32 for the Windows95/98 or NT operating system.
# C FLAGS used -DUSE_VENDOR_BLAS (needed in SuperLU) if UNIX in C++ FLAGS
#

# modified as optimizaton currently causing problems with Steeln01 code
ifeq ($(DEBUG_MODE), DEBUG)

C++FLAGS = -Wall -D_LINUX -D_UNIX -D_TCL85 \
$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG) \
-g -pg


CFLAGS = -Wall -pg $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
FFLAGS = -Wall

# Linker
LINKER = $(CC++)
LINKFLAGS = -g -pg

else

C++FLAGS = -Wall -D_LINUX -D_UNIX -D_TCL85 \
$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) \
$(PROGRAMMING_FLAG) -O3 -ffloat-store
CFLAGS = -Wall -O2
FFLAGS = -Wall -O

# Linker
LINKER = $(CC++)
LINKFLAGS = -rdynamic -Wl

endif


GRAPHIC_FLAG = -D_GLX

# Misc
MAKE = make
CD = cd
ECHO = echo
RM = rm
RMFLAGS = -f
SHELL = /bin/sh

# %---------------------------------------------------------%
# | SECTION 5: COMPILATION |
# | |
# | The following macros specify the macros used in |
# | to compile the source code into object code. |
# %---------------------------------------------------------%

.SUFFIXES:
.SUFFIXES: .C .c .f .f90 .cpp .o .cpp

#
# %------------------%
# | Default command. |
# %------------------%
#
.DEFAULT:
@$(ECHO) "Unknown target $@, try: make help"
#
# %-------------------------------------------%
# | Command to build .o files from .f files. |
# %-------------------------------------------%
#

.cpp.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@

.C.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@
.c.o:
@$(ECHO) Making $@ from $<
$(CC) $(CFLAGS) -c $< -o $@
.f.o:
@$(ECHO) Making $@ from $<
$(FC) $(FFLAGS) -c $< -o $@

# %---------------------------------------------------------%
# | SECTION 6: OTHER LIBRARIES |
# | |
# | The following macros specify other libraries that must |
# | be linked with when creating executables. These are |
# | platform specific and typically order does matter!! |
# %---------------------------------------------------------%
MACHINE_LINKLIBS = -L$(BASE)/lib \
-L$(HOME)/lib

MACHINE_NUMERICAL_LIBS = -lm \
$(ARPACK_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(UMFPACK_LIBRARY) \
$(LAPACK_LIBRARY) $(BLAS_LIBRARY) $(CBLAS_LIBRARY) \
$(GRAPHIC_LIBRARY)\
-ldl -lgfortran -lpng

MACHINE_SPECIFIC_LIBS =



# %---------------------------------------------------------%
# | SECTION 7: INCLUDE FILES |
# | |
# | The following macros specify include files needed for |
# | compilation. |
# %---------------------------------------------------------%
MACHINE_INCLUDES = -I/usr/include \
-I$(BASE)/include \
-I/usr/include/c++/4.3.3 \
-I/usr/include/GL \
-I$(HOME)/include -I$(HOME)/blitz

# this file contains all the OpenSees/SRC includes
include $(FE)/Makefile.incl

TCL_INCLUDES = -I/usr/include/tcl8.5

INCLUDES = $(TCL_INCLUDES) $(FE_INCLUDES) $(MACHINE_INCLUDES)
Top
charlietseng
Posts: 1
Joined: Thu Jan 28, 2010 2:32 am

Help !! I got an error

Post by charlietseng »

I got "Makefile.def 194: *** missing separator. Stop when I type " make" . Did i miss something?
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Post by fmk »

have a look at lines 193 and 194 in the Makefile
Top
ja_abell
Posts: 43
Joined: Tue Nov 03, 2009 1:22 pm
Location: Universidad de los Andes
Contact:
Contact ja_abell

Post by ja_abell »

On ubuntu 9.10 I complete the compiling but when I try to execute I get a Segmentation Fault. Are there additional settings?
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Post by fmk »

try using gdb to see where the problem is.
Top
Birdolokjoukastre
Posts: 3
Joined: Sun Feb 21, 2010 5:43 am
Location: Ghana
Contact:
Contact Birdolokjoukastre

dump furniture texas

Post by Birdolokjoukastre »

[color=green][size=24]furniture tacoma washington[/size][/color]
maple furniture bedroom [url=http://pevyrul7ta.100webspace.net/white ... girls.html]znakomstva[/url] bedroom furniture ebony [url=http://pevyrul7ta.100webspace.net/dollh ... iture.html]dollhouse headboard bedroom furniture[/url]
french country dining room furniture [url=http://pevyrul7ta.100webspace.net/furni ... ables.html]furniture bedside tables[/url] vintage dolls house furniture
john deere bedroom decor and furniture [url=http://pevyrul7ta.100webspace.net/bedro ... e-log.html]bedroom discount furniture log[/url] drexel heritage furniture bedroom set [url=http://pevyrul7ta.100webspace.net/teen- ... iture.html]teen queen bedroom furniture[/url]
sherrill bedroom furniture [url=http://pevyrul7ta.100webspace.net/wicke ... iture.html]wicker cane furniture[/url] lea childrens furniture
Top
Post Reply

Return to “Framework”