Pinching4 Material Calibration

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
ksalman
Posts: 3
Joined: Mon Feb 27, 2023 11:47 am

Pinching4 Material Calibration

Post by ksalman »

Hello Everyone,

I am modeling a Light Timber Frame shear wall based on experimental testing. The behavior of wall connections is what I am focusing on to calibrate and I am trying to use pinching4 material. Is there any source to start the calibration process (calculating the parameters from the experimental test and testing the material)?

Thank you
Leonar
Posts: 6
Joined: Thu Mar 02, 2023 8:41 am
Contact:

Re: Pinching4 Material Calibration

Post by Leonar »

Wondering the same :s
ksalman
Posts: 3
Joined: Mon Feb 27, 2023 11:47 am

Re: Pinching4 Material Calibration

Post by ksalman »

I somehow got the idea of how to do it but need some more clarification.
If you want to start, the pinching4 example is available to try to play with that example and you might get some idea.
Here is the example.
Good luck
https://opensees.berkeley.edu/wiki/inde ... ialExample
selimgunay
Posts: 916
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Pinching4 Material Calibration

Post by selimgunay »

You can also check the references here: https://opensees.berkeley.edu/wiki/inde ... 4_Material

The quoFEM application of the SimCenter also allows calibration of OpenSees material models. https://simcenter.designsafe-ci.org/res ... plication/
ksalman
Posts: 3
Joined: Mon Feb 27, 2023 11:47 am

Re: Pinching4 Material Calibration

Post by ksalman »

Thank you for your input. May I know how we can calculate the parameters from the experimental data if using a tcl code for the calibration process?
Also, some hysteresis use parallel materials like ENT+Pinching and QuoFEM considering 1 material at a time.
I am unable to attach a snap from the hysteresis.
selimgunay
Posts: 916
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Pinching4 Material Calibration

Post by selimgunay »

QuoFEM allows using an OpenSees file: https://nheri-simcenter.github.io/quoFE ... ities.html
Post Reply