please give me a help

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
carlota
Posts: 8
Joined: Mon Sep 19, 2022 3:43 am

please give me a help

Post by carlota »

dear :
When I analyzed the seismic response of the cable-stayed bridge, the following results appeared.
####################################################
WARNING BandGenLinLapackSolver::solve() -factorization failed, matrix singular U(i,i) = 0, i= 106
WARNING NewtonRaphson::solveCurrentStep() -the LinearSysOfEqn failed in solve()
StaticAnalysis::analyze() - the Algorithm failed at iteration: 0 with domain at load factor 0.1
OpenSees > analyze failed, returned: -3 error flag
static over
ArpackSolver::Error with _saupd info = -1
N must be positive.
WARNING DirectIntegrationAnalysis::eigen() - EigenSOE failed in solve()
T1 = Inf s
T2 = 6.283185307179586 s
DynamicCharacteristics over
FATAL BandGenLinSOE::getX - vectX == 0!

############################################################
I hope someone could give me some suggestions, thank you very much.
carlota
Posts: 8
Joined: Mon Sep 19, 2022 3:43 am

Re: please give me a help

Post by carlota »

Thanks a lot, this is very inspiring for me
Post Reply