child killed: unknown signal

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
jishuaiwang
Posts: 8
Joined: Sat Apr 04, 2020 5:29 pm

child killed: unknown signal

Post by jishuaiwang »

Dear all
I installed the mpich2-1.4.1p1-win-x86-64, the example cpi.exe can be run correctly. And i put OpenseesSP2.5.0 and main.tcl in the same file, nevertheless,when i double click openseesSP.exe and input "mpiexec -n 4 OpenSeesSP main.tcl" , only return "child killed: unknown signal" as follows:

Master Process Running OpenSees Interpreter 0
OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center
Version 2.5.0 (rev 6347) 64-Bit

(c) Copyright 1999-2016 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)


OpenSees > mpiexec -n 4 OpenSeesSP main.tcl
child killed: unknown signal
OpenSees >

Could you tell me how to solve it? i really appreciate your time and consideration in advance .


Jishuaiwang
Southeast University
School of civil engineering
Nanjing, China
1042812256@qq.com
ghazalsaed
Posts: 1
Joined: Wed Jul 21, 2021 7:29 am

Re: child killed: unknown signal

Post by ghazalsaed »

Hello,
Did you solve the problem?
Post Reply