zerolenghth warning

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
masoudiamihossein
Posts: 1
Joined: Fri Apr 26, 2019 7:14 am

zerolenghth warning

Post by masoudiamihossein »

can i pass up from this warning????

WARNING ZeroLength::setDomain(): Element 2010 has L= 0.2, which is greater than the tolerance
Top
yuqi
Posts: 3
Joined: Wed Jul 28, 2021 6:25 pm

Re: zerolenghth warning

Post by yuqi »

yes , the Opensees can go on the calculation after the warning.
Top
Post Reply

Return to “Parallel Processing”