Equivalent viscous damping for new damper

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
Gholamreza
Posts: 84
Joined: Tue Nov 07, 2017 7:47 am
Location: University of Central Florida

Equivalent viscous damping for new damper

Post by Gholamreza »

Hello Engineers,

I developed a new yielding material for a new damper in C++/Opensees which works just fine and the results are verified with MATLAB.
I would like to evaluate the efficiency of this new damper in tall buildings but I don't know how many dampers per floor should I use!!.... is there any way/document you can tell me to calculate equivalent viscous damping or anything that I have an idea how many dampers I should use or how much dissipated energy I should have in my analysis?
selimgunay
Posts: 916
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Equivalent viscous damping for new damper

Post by selimgunay »

This study can provide good information on the optimized damper locations:

https://peer.berkeley.edu/sites/default ... _mahin.pdf
Post Reply