2D Model Display

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

nbazaraa
Posts: 21
Joined: Thu Feb 04, 2016 6:53 pm
Location: heriot watt university

2D Model Display

Post by nbazaraa »

Dear Frank,
Would you please give me some hints on how to display nodal points or model as a whole in 2D/plane?
I have a bit complicated shape and I want check the layout of the nodes?

Thank you for your continuous help...
Regards
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: 2D Model Display

Post by fmk »

try downloading one of these:

Win32: http://opensees.berkeley.edu/OpenSees/c ... -alpha.zip
Win64: http://opensees.berkeley.edu/OpenSees/c ... -alpha.zip

start the exe. in left hand window (the interpreter) cd to dierctory contaiining script and then source script. in "View" pull-down menu select to view the Renderer. you can toggle on and off the node and ele tags by clicking on the little square windows at top left of renderer window that pops up.
nbazaraa
Posts: 21
Joined: Thu Feb 04, 2016 6:53 pm
Location: heriot watt university

Re: 2D Model Display

Post by nbazaraa »

Thank you so much. It works now and I can see the model.
gopaladhikari
Posts: 79
Joined: Tue Nov 07, 2006 3:17 am
Location: Jacobs

Re: 2D Model Display

Post by gopaladhikari »

HI Frank

Do you have the same for Mac OS X?
Gopal Adhikari, PhD
Associate Bridge Engineer
Jacobs
Wellington, New Zealand
sb1966
Posts: 151
Joined: Wed Jul 23, 2008 8:08 am
Location: NERIST, INDIA
Contact:

Re: 2D Model Display

Post by sb1966 »

Dear fmk,
Is it available for Linux as well? If not yet, when should we expect it?
----------------------------------
With Regards,
sb1966
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: 2D Model Display

Post by fmk »

i have it for mac, but it currently rquires you install 5GB or so of software .. i need to rebuild that software to build a static executable that brings the size down to 20MB.

as for LINUX, no .. i do not release Linux binaries as my linux developers prefer to build themselves .. i will make the code available through GitHub hopefully by Aug 1 and you will be able to build it yourself.
sb1966
Posts: 151
Joined: Wed Jul 23, 2008 8:08 am
Location: NERIST, INDIA
Contact:

Re: 2D Model Display

Post by sb1966 »

Dear fmk
Thanks a lot for your reply. Congratulations for this new development.
----------------------------------
With Regards,
sb1966
fabriziocornali
Posts: 7
Joined: Thu May 19, 2016 1:10 am
Location: University of Bergamo, Dalmine (BG), IT; Tufts University, Medford, MA, US

Re: 2D Model Display

Post by fabriziocornali »

Hi fmk,
I'm new with OpenSees software, I'd like to ask you about a problem with "recorder display" command. The reference file that I tried to run is "EigenAnal_twoStoreyShearFrame.tcl" available in the "Basic Examples Manual" section on the OpenSees website.
I tried to run the analysis on both Windows (8.1) and Mac OS X (El Capitan) and I saw that in Win the two windows of the modes of shape (recorder display command) appear, instead when I run the analysis on OS X these don't appear.
Do I need to write something different in the code or there is something else to do? Do you already know this problem?

Thank you
Fabrizio
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: 2D Model Display

Post by fmk »

no the mac is the issue .. i will release new software soon to display the models that will run on the mac .. i have had problems since 10.8 on the mac when Apple removed Carbon and only provided the Cocoa interface for the graphics.
fabriziocornali
Posts: 7
Joined: Thu May 19, 2016 1:10 am
Location: University of Bergamo, Dalmine (BG), IT; Tufts University, Medford, MA, US

Re: 2D Model Display

Post by fabriziocornali »

Thanks you so much for the answer, we're looking forward to see this new feature for mac!
Best
Fabrizio
mickele
Posts: 9
Joined: Thu Jan 13, 2011 6:49 am
Location: Italy

Re: 2D Model Display

Post by mickele »

Do you have news about the release of OpenseesIde source code
venkateshyadav
Posts: 52
Joined: Fri Mar 17, 2017 11:01 am
Location: IIT Patna

Re: 2D Model Display

Post by venkateshyadav »

fmk wrote:
> try downloading one of these:
>
> Win32: http://opensees.berkeley.edu/OpenSees/c ... -alpha.zip
> Win64: http://opensees.berkeley.edu/OpenSees/c ... -alpha.zip
>
> start the exe. in left hand window (the interpreter) cd to dierctory
> contaiining script and then source script. in "View" pull-down
> menu select to view the Renderer. you can toggle on and off the node and
> ele tags by clicking on the little square windows at top left of renderer
> window that pops up.
Hi,
Am beginner to Opensees. May be it is a silly question.
In OpenSeesIDE, when the pushover analysis is performed, is it possible to see the hinges formation location also?
azlanadnan
Posts: 1
Joined: Fri May 05, 2017 2:39 am
Location: University Technology Malaysia

Re: 2D Model Display

Post by azlanadnan »

fabriziocornali wrote:
> Hi fmk,
> I'm new with OpenSees software, I'd like to ask you about a problem with
> "recorder display" command. The reference file that I tried to
> run is "EigenAnal_twoStoreyShearFrame.tcl" available in the
> "Basic Examples Manual" section on the OpenSees website.
> I tried to run the analysis on both Windows (8.1) and Mac OS X (El Capitan)
> and I saw that in Win the two windows of the modes of shape (recorder
> display command) appear, instead when I run the analysis on OS X these
> don't appear.
> Do I need to write something different in the code or there is something
> else to do? Do you already know this problem?
>
> Thank you
> Fabrizio

Hi FMK,
Does the display recorder work on MAC OS CATALINA? Thank you.

Azlan Adnan
UTM
abira
Posts: 33
Joined: Mon Feb 03, 2020 10:26 pm

Re: 2D Model Display

Post by abira »

azlanadnan wrote: Thu Apr 23, 2020 4:23 pm fabriziocornali wrote:
> Hi fmk,
> I'm new with OpenSees software, I'd like to ask you about a problem with
> "recorder display" command. The reference file that I tried to
> run is "EigenAnal_twoStoreyShearFrame.tcl" available in the
> "Basic Examples Manual" section on the OpenSees website.
> I tried to run the analysis on both Windows (8.1) and Mac OS X (El Capitan)
> and I saw that in Win the two windows of the modes of shape (recorder
> display command) appear, instead when I run the analysis on OS X these
> don't appear.
> Do I need to write something different in the code or there is something
> else to do? Do you already know this problem?
>
> Thank you
> Fabrizio

Hi FMK,
Does the display recorder work on MAC OS CATALINA? Thank you.

Azlan Adnan
UTM
I also have the same problem with MacOS (Catalina). Were you able to solve the problem.
anuragiitg
Posts: 12
Joined: Mon Aug 26, 2013 7:52 pm
Location: The University of Utah
Contact:

Re: 2D Model Display

Post by anuragiitg »

You could use OpenSeesPy visualization library to interactively view your Tcl models and output. Here is an example.

https://anuragupadhyay.weebly.com/opens ... s-tcl.html
--
Anurag Upadhyay
Post Reply