opensees3.0.3 cannot work well with PlaneStressUserMaterial

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
PengpengZhao
Posts: 1
Joined: Fri Mar 08, 2019 5:16 am

opensees3.0.3 cannot work well with PlaneStressUserMaterial

Post by PengpengZhao »

I downloaded the latest opensees 3.0.3 software yesterday, but found it didn't work well when I used "LayeredShell" with "PlaneStressUserMaterial" . It shows "PSUMAT - NOT DEFINED IN THIS VERSION, SOURCE CODE RESTRICTED", so, the latest software may not be well compiled.
Top
luky
Posts: 9
Joined: Wed Jun 15, 2016 2:02 am
Location: University of Bath

Re: opensees3.0.3 cannot work well with PlaneStressUserMaterial

Post by luky »

You are right! I got the same problem. Fortunately, the mac version seems to work well with it. Actually the last version seems to have different bugs.
Top
zemiki
Posts: 13
Joined: Tue Jan 16, 2018 9:38 pm
Location: South Korea

Re: opensees3.0.3 cannot work well with PlaneStressUserMaterial

Post by zemiki »

I also came across a similar problem. Did you find any solution? Does using Mac version solve the problem or you found any other way?
https://opensees.berkeley.edu/community ... 1b#p114021
Top
luky
Posts: 9
Joined: Wed Jun 15, 2016 2:02 am
Location: University of Bath

Re: opensees3.0.3 cannot work well with PlaneStressUserMaterial

Post by luky »

The problem can be solved installing an older version. Have a look here.
https://opensees.berkeley.edu/community ... 39#p113939
Top
Post Reply

Return to “OpenSees.exe Users”