can i put out the strain and stress of a zerolength element?

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
luochuizi
Posts: 18
Joined: Fri Jun 07, 2019 6:54 pm

can i put out the strain and stress of a zerolength element?

Post by luochuizi »

i want to put out the strain and stress of a zerolength element? how to make it? by the way, i did not define a fiber section.
Top
selimgunay
Posts: 916
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: can i put out the strain and stress of a zerolength elem

Post by selimgunay »

You need a zerolength section element with fiber sections to record the stresses and strains
Top
luochuizi
Posts: 18
Joined: Fri Jun 07, 2019 6:54 pm

Re: can i put out the strain and stress of a zerolength elem

Post by luochuizi »

thanks for your reply.i will take it.
Top
Post Reply

Return to “OpenSees.exe Users”