How to define a Cyclic load in opensees?

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
luochuizi
Posts: 18
Joined: Fri Jun 07, 2019 6:54 pm

How to define a Cyclic load in opensees?

Post by luochuizi »

as the topic, How to define a Cyclic load in opensees?
Top
ismailqeshta
Posts: 115
Joined: Mon Feb 20, 2017 1:19 am
Location: RMIT University, Melbourne, Australia

Re: How to define a Cyclic load in opensees?

Post by ismailqeshta »

This example shows how to apply cyclic load:
http://opensees.berkeley.edu/wiki/index ... rtal_Frame
Top
luochuizi
Posts: 18
Joined: Fri Jun 07, 2019 6:54 pm

Re: How to define a Cyclic load in opensees?

Post by luochuizi »

thanks for your answer.it works well.
Top
Post Reply

Return to “OpenSees.exe Users”